Right click your connection icon, go to Properties>Configure>General tab See what you have the baudrate speed set to in the Maximum Speed box. If it's 115200, try changing to a lower setting, like 38400. Not likely the cause, but you never know!
vic http://groups.yahoo.com/group/WinTips-Tricks/ ----- Original Message ----- From: "Peter Kaulback" <[EMAIL PROTECTED]> To: "pcworks" <[EMAIL PROTECTED]> Sent: Saturday, March 08, 2003 10:51 PM Subject: PCWorks: External analog modem won't dial out with router > i have a new USR external modem attached to a new USR broadband router, > it's for fail over in case the as yet uninstalled dsl fails. The modem > dials in fine when connected directly to the computer, but it cannot > complete the dial up when plugged into the router. The router is > functioning perfectly with all clients being able to reach it and the print > server therein. > > USR has suggested adding the AT&F1 command to the dialup configuration but > this doesn't help. > > Is there anything I may be missing? ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
