I appreciate the replies and I have not checked the bios and I am not sure
how
to do that. What I have found out by checking a win98 working system is when
I
use the hardware install feature I should select the ECP port. I am not sure
what ECP stands for but I noticed that the ECP port in the working system
had
ECP (LTP) next to it. I can install that as I have already tried. If I
remember correctly when I went to printer properties then detail I had LPT1
in
there but when I tried to capture port it would not do anything. On the
working system it captured the port.

Thanks Larry
  ----- Original Message -----
  From: Michael Brown
  To: [EMAIL PROTECTED]
  Sent: Monday, July 28, 2003 4:42 PM
  Subject: RE: PCWorks: LPT1 port seems to have disappeared!


  Larry

  Have you checked the motherboard bios to see if the port somehow got
turned
  off by accident.  I used to to printer support for one of the major
  manufacturer's out there and we always checked the bios setup to make sure
  it is turned on.  I cannot think of anything else.

  Sincerely;
  Mike

  -----Original Message-----
  From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
  Behalf Of Larry Browning
  Sent: Monday, July 28, 2003 8:36 AM
  To: PC Questions
  Subject: PCWorks: LPT1 port seems to have disappeared!

  This is not my computer but a friends. They have Win 98 and we installed a
  different printer and its driver which worked on my Win98 systems just
fine.
  Now when we look at printers the Epson 640 is dimmed and when I go to
device
  manager and choose ports I do not see the LPT1. I have tried capture to no
  avail and I am not sure if the port is defective all of a sudden or what.
I
  also disconnected the port from the back of the computer which also did
not
  help. I also reinstalled the drivers for the Epson 640 which also did not
  help. I will change the cable next. Any thoughts on how to troubleshoot
  this.
  It worked the day I installed it.

  Thanks Larry
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================

Reply via email to