I have found that the Cyberdrive CW088D does not require a drive. It talks
about the IDE or something which is ok in my device manager. It use to have a
yellow mark next to it but I deinstalled and reinstalled Nero 6.0. Now I can
at least read my CD. The messages I am getting is when I try to write to the
CD the CD writer wizard comes up and says there is no disk in there. When I go
direct to Nero and try to write that way thru the Nero SmartStart it goes thru
the motions like it should then come back with a message that another program
is using the writer!! So around and around I go.

Larry
  ----- Original Message -----
  From: Peter Kaulback
  To: [EMAIL PROTECTED]
  Sent: Tuesday, December 02, 2003 8:54 AM
  Subject: Re: PCWorks: How to stop Microsoft CD writer


  Larry, where are you seeing this message? Is it being shown in the Nero
  Info tool?

  Can you see your model in the device manager and is it shown to be working
  properly?

  You may need a firmware upgrade not a driver, most if not all optical
  drives use the native drivers found in most OS's. Unfortunately the
  firmware upgrade site for Cyberdrive is down
  http://www.cyberdrive.de/en/download.php?op=viewdownload&cid=3

  Peter Kaulback

  In the hour of 10:20 AM 12/1/2003, Larry Browning spoke this:

  >Thanks Peter for the input. I am getting a message that the driver for this
CD
  >R/RW is corrupt. It is a Cyberdrive CW088D and all I can find on the
internet
  >is a DOS driver. I do not find a driver for XP. This driver asked for
  >MSCDEX.exe and a file search says there isn't such a file on the computer
in
  >XP pro. I searched another computer which has XP pro and sure enough there
is
  >no such file. I can't seem to get the computer to use a resident generic
  >driver so I am lost. This is also a compaq so the restore disk that come
with
  >it I can not even read due to the CD problem.
  >thanks again for hanging in there with me.
  >Larry
  >   ----- Original Message -----
  >   From: Peter Kaulback
  >   To: [EMAIL PROTECTED]
  >   Sent: Monday, December 01, 2003 9:30 AM
  >   Subject: Re: PCWorks: How to stop Microsoft CD writer
  >
  >
  >   Open "My Computer" and left click on your cd burner icon, choose File,
  >   Properties, Recording, and uncheck "Enable cd recording on this drive".
I
  >   had missed that step in the sequence, it isn't available if the IMAPI
  >   service is disabled from the beginning.
  >
  >   Peter Kaulback
  >
  >   In the hour of 06:49 AM 12/1/2003, Larry Browning spoke this:
  >
  >   >I tried this but it was already set to manual. I must have something
else
  >set
  >   >incorrectly.
  >   >
  >   >Larry
  >   >   ----- Original Message -----
  >   >   From: Peter Kaulback
  >   >   To: [EMAIL PROTECTED]
  >   >   Sent: Saturday, November 29, 2003 10:46 PM
  >   >   Subject: Re: PCWorks: How to stop Microsoft CD writer
  >   >
  >   >
  >   >   Open up your Services dialog in the Control panel, under
Administrative
  >   >   Tools and look for IMAPI CD-Burning COM Service. Stop it and set it
to
  >   >   manual and you will be set.
  >   >
  >   >   Peter Kaulback
  >   >
  >   >   In the hour of 04:31 PM 11/29/2003, Larry Browning spoke this:
  >   >
  >   >   >I have Windows XP pro and installed Nero 6.0 cd software. Every
time I
  >try
  >   >to
  >   >   >write to a CD, MS CD writer wizard comes up. How do I disable or
  > remove
  >MS
  >   >CD
  >   >   >wizard? I tried file search but did not find it.
  >   >   >
  >   >   >Thanks
  >   >   >
  >   >   >Larry
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================

Reply via email to