Hello again ... HP Computer 3+ years old, 30 gig hard drive, Windows 98...

Thank you, Jorge. I never knew they weren't important; I bet there are thousands
of of files in any operating system that needn't be there. Personally I've done a
lot of "housecleaning" and am satisfied with the results. But I never considered
Autoexec.bat and Config.sys as unnecessary. I temporarily removed those four
files and placed them into a folder I keep on my desktop (named, "Hold") to see
how the system works without them in their original places. I always do that when
I'm not sure of the importance of any file. So far, all is working fine.

The McAfee was deleted from my system and replaced by AVG. I'm happy about that
and thank Hugh for the idea. Seems the deletion didn't remove the line from
Autoexec file. Now the question is where to put that "numlock=off" command. If it
is in the BIOS, that opens up a new adventure for me as I've heard of it, did
some reading about it, but never edited or saw it. Any help on that? ... Harold

From: "Jorge D. Camboni" <[EMAIL PROTECTED]>
Subject: Re: PCWorks: Config.sys Warning in Safe Mode

JORGE WRITES --- "You can remove all those autoexecs and configs and probably you
do not lose anything, besides you DO get rid of that DOS cdrom driver which in
fact slows down windows forcing it into DOS compatibility mode. The AVG and
McAfee initial DOS scans (one after the other!!!!) seem to be equally useless.
You still may need the line concerning the USB keyboard, in case you do have one
and you can not manage it through the bios (wonder why you need a special DOS
driver for it)

Unless you are a DOS fanatic and besides you spend most of your time with huge
DOS based games, wipe them off and you'll be happier and windows will be happier
and faster too" --- Jorge


> I have two Autoexec files and two Config.sys files.

> 1. One Auto exec file found in C:\ says:
>
> @C:\PROGRA~1\AVG6\bootup.exe
> C:\PROGRA~1\NETWOR~1\MCAFEE~1\SCAN.EXE C:\
> @IF ERRORLEVEL 1 PAUSE
> @echo off
> REM To make a DOS Boot Diskette; See the file
> C:\DOSBOOT\DOSBOOT.TXT
> path C:\WINDOWS;C:\WINDOWS\COMMAND;C:\PROGRA~1\AVG6
> @REM SetPower.exe will initialize the USB Keyboard.
> @c:\windows\system\setpower.exe
>
> 2. The Autoexec found in C:\dosboot says:
>
> @echo off
> REM To make a DOS Boot Diskette, see the file
> C:\DosBoot\DosBoot.txt.
> set path=c:\windows\command
> LH c:\windows\command\mscdex /D:IDECD000 /L:M
> SET PROMPT=$p$g
> SET TEMP=C:\windows\TEMP
> SET TMP=C:\windows\TEMP
> call c:\dosboot\drivers.bat
> c:\windows\smartdrv /q
> c:
> cd \windows
> REM to enable ZIP support in DOS:
> REM 1) cd C:\IOMEGA
> REM 2) run IOMEGA.EXE
> REM 3) then uncomment the following line
> REM C:\IOMEGA\GUEST.EXE
> REM for DOS Networking including most networked games,
> REM read the file IPX.BAT and then uncomment the following
> REM CALL C:\DOSBOOT\IPX.BAT
> REM for DOS Networking including most networked games,
> REM read the file IPX.BAT and then uncomment the following
> REM CALL C:\DOSBOOT\IPX.BAT
>
> 1. The contents of the Config.sys file in C:\ is...
>
> REM To make a DOS Boot Diskette; See the file
> C:\DOSBOOT\DOSBOOT.TXT
> [common]
> dos=high,umb
> buffers=40
> device=c:\windows\himem.sys /testmem:off
> DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
> rem The below DOS CD ROM driver is not required to run Windows
> 98.
> DEVICE=c:\cdrom\OakCdRom.SYS /D:IDECD000
> numlock=off
>
> 2. The contents of the Config.sys file in C:\dosboot is...
>
> REM To make a DOS Boot Diskette, see the file
> C:\DosBoot\DosBoot.txt.
> REM Configure the ISA PNP devices
> rem device=c:\icu\dwcfgmg.sys
> DOS=HIGH,UMB
> buffershigh=10
> fcbshigh=4
> fileshigh=30
> lastdrivehigh=Z
> stackshigh=9,256
> Device=C:\WINDOWS\Himem.Sys /testmem:off
> Device=C:\WINDOWS\Emm386.exe RAM NOEMS
> DEVICE=c:\cdrom\OakCdRom.SYS /D:IDECD000
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================

Reply via email to