same with me on Win7. > Gesendet: Sonntag, 09. April 2017 um 13:01 Uhr > Von: "mario.buoninfante" <[email protected]> > An: Ingo <[email protected]>, 'Ingo' <[email protected]>, 'Christof > <[email protected]> > Cc: pd-list <[email protected]> > Betreff: RE: [PD] refresh MIDI device list on run > > What I noticed on Win10 is that if the device is connected when you launch > Pd, then you can unplug it and plug it again, without any issues. And one > thing more, a new device is detected only if I've never opened the MIDI > dialog. I mean: > 1. Launch Pd > 2. Plug a MIDI device > 3. Open MIDI dialog (either from Menu or within the patch) > 4. Pd recognize the device > > After I opened MIDI dialog the first time, no new devices will be recognized. > That's weird > > > > Sent from my Wiko ROBBYOn Apr 9, 2017 11:25, Ingo <[email protected]> wrote: > > > > Funny, I'm using that since years and it absolutely "always" works here (on > > Linux) both for adding new devices or replugging previously unplugged MIDI > > devices. > > I'm not using Pd on Windows, though. But I can't see why Pd itself would > > behave differently on Windows. > > Whenever you send a (properly formatted) message to the midi-dialog it will > > activate anything that is connected at that moment. > > > > Ingo > > > > > > > -----Original Message----- > > > From: mario buoninfante [mailto:[email protected]] > > > Sent: Sunday, April 09, 2017 11:00 AM > > > To: Ingo; 'Christof Ressi' > > > Cc: [email protected] > > > Subject: Re: [PD] refresh MIDI device list on run > > > > > > Hi Ingo, > > > > > > actually I already tried with this, but it can help only if you want to > > change > > > MIDI device. if I plug a new device after I launched Pd, nothing changes > > also > > > using [pd midi-dialog( > > > > > > I'm trying on Win10 (usually I work on Linux but there I used to work > > > with > > > Jack, thus no prob at all ;) ) > > > > > > > > > On 09/04/2017 10:08, Ingo wrote: > > > > That should read: "n5 = sample rate" instead of "n3 = sample rate" > > > > It's for Linux, of course. Don't know how to handle this in Windows or > > OSX. > > > > > > > > Ingo > > > > > > > >> -----Original Message----- > > > >> From: Pd-list [mailto:[email protected]] On Behalf Of Ingo > > > >> Sent: Sunday, April 09, 2017 10:53 AM > > > >> To: 'Christof Ressi'; 'mario buoninfante' > > > >> Cc: [email protected] > > > >> Subject: Re: [PD] refresh MIDI device list on run > > > >> > > > >> You need to refresh the midi dialog by banging this: > > > >> > > > >> [; pd midi-dialog 1 2 3 4 1 2 3 4 4 4( > > > >> > > > >> first 4 = input device numbering (might be different than "1 2 3 4", > > e.g. "2 > > > >> 0 > > > >> 0 0") > > > >> next 4 = output device numbering (might be different than "1 2 3 4") > > > >> #9 = number of input devices (1-4) > > > >> #10 = number of output devices (1-4) > > > >> > > > >> Same thing for audio-dialog: > > > >> > > > >> [; pd audio-dialog n1 n1 n1 n1 n2 n2 n2 n2 n3 n3 n3 n3 n4 n4 n4 n4 n5 > > n6( > > > >> > > > >> n1 = inputs device numbers > > > >> n2 = number of input channels per device > > > >> n3 = outputs device numbers > > > >> n4 = number of output channels per device > > > >> n3 = sample rate > > > >> n6 = delay in milliseconds > > > >> > > > >> Making an automatic refresh is a bit difficult. > > > >> > > > >> I did it by monitoring the dev folder (or actually I created a > > subfolder for > > > >> my > > > >> known devices and I'm monitoring changes with > > > >> > > > >> [hcs/folder_list /dev/"mididevice-subfolder-name"/*] every 3 seconds. > > > >> > > > >> When a change is detected it bangs [; pd midi-dialog 1 2 3 4 1 2 3 4 4 > > > 4( > > > >> So all of my "known" devices (by udev names) are mounted > > > automatically. > > > >> For unknown devices I need to execute a [bang] on [; pd midi-dialog 1 > > > >> 2 > > 3 > > > 4 > > > >> 1 > > > >> 2 3 > > > >> 4 4 4( > > > >> > > > >> Ingo > > > >> > > > >> > > > >>> -----Original Message----- > > > >>> From: Pd-list [mailto:[email protected]] On Behalf Of > > > >>> Christof Ressi > > > >>> Sent: Sunday, April 09, 2017 10:11 AM > > > >>> To: mario buoninfante > > > >>> Cc: [email protected] > > > >>> Subject: Re: [PD] refresh MIDI device list on run > > > >>> > > > >>> Never worked for me (for audio devices neither), I always had to > > > >>> restart Pd > > > >>> :- > > > >>> (. Also with audio devices. > > > >>> > > > >>> > > > >>> > > > >>> Gesendet: Sonntag, 09. April 2017 um 09:51 Uhr Von: "mario > > > buoninfante" > > > >>> <[email protected]> An: [email protected] Betreff: [PD] > > > >>> refresh MIDI device list on run > > > >>> > > > >>> Hi all, > > > >>> does anyone know if it's possible to "refresh" the MIDI device list > > > >>> while Pd is running? i.e. you plug a new device on run. > > > >>> Cheers, > > > >>> Mario > > > >>> _______________________________________________ Pd- > > > >> [email protected] > > > >>> mailing list UNSUBSCRIBE and account-management -> > > > >>> https://lists.puredata.info/listinfo/pd-list > > > >>> > > > >>> _______________________________________________ > > > >>> [email protected] mailing list > > > >>> UNSUBSCRIBE and account-management -> > > > >>> https://lists.puredata.info/listinfo/pd-list > > > >> > > > >> > > > >> _______________________________________________ > > > >> [email protected] mailing list > > > >> UNSUBSCRIBE and account-management -> > > > >> https://lists.puredata.info/listinfo/pd-list > > > > > > > > > > > > > --- > > > This email has been checked for viruses by Avast antivirus software. > > > https://www.avast.com/antivirus > > > > >
_______________________________________________ [email protected] mailing list UNSUBSCRIBE and account-management -> https://lists.puredata.info/listinfo/pd-list
