Hi Bill,
Which flash are you using?
The center post on the 4P`s is just there for looks, it has no function.
See:
http://www.geocities.com/sorefeets/lx/lx_flash.htm
for the pin connections, although it targets the LX, the Super P has
the same contacts. I`m sorry if I was not able to discern your
testing procedure, but does the flash fire on the Super P`s
hot shoe?
Steve Larson
Redondo Beach, California
----- Original Message -----
From: "William Kane" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, January 31, 2001 10:16 PM
Subject: Re: Synch Cord B advice
> Ok,
>
> Update . . . here's the situation:
>
> 1. Flash first on Super Program
>
> 2. Flash fires on both grips with the LX-PC--> 4p cord
>
> 3. Hooked up 4p synch cord to grip and flash on grip. Shorted out center
> post on cord and the side of grip. Flash fires.
>
> 4. hook up identical set up as above to Super Program and no flash. (yes
I
> cleaned the contacts with an eraser)
>
> Have an MX, but don't know if this will do any good for testing puroposes.
> (hot shoe on MX may be dead due to dropping damage (no i didnt' drop it, I
> got it that way))
>
> my question: What are the possible problems with setup 4 that makes it
not
> want to fire?
>
> Illinois Bill
>
> -
> This message is from the Pentax-Discuss Mail List. To unsubscribe,
> go to http://www.pdml.net and follow the directions. Don't forget to
> visit the Pentax Users' Gallery at http://pug.komkon.org.
>
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org.
