Hey gang,
Recently got myself a synch cord B, synch cord c(not sure if this is
the designation) and modified grip (cut down short to fit better in a
bag) off of the old e bayersite. (Item #1208992296)
Well, to make a long story short, I popped my AF280T onto the grip,
and hooked the synch cord B onto my Super Program, popped the shutter in
125x mode, and NOTHING. No flash. Puzzled, I cleaned all the contacts,
got out my own grip and tried to pop the flash again. NOTHING.
HMMMMMMMMMMMM.
Ok, out came the trusty ohm meter. Seems the center contact (see
ascii art below) on the synch cord b isn't shorting with the center
contact on either of the grips. Can anyone with a few spare moments map
out their working grip and synch cord B on an ohm meter for me? or can
anyone provide any insight?
* <---- This contact This contact --> | *
|
* * (synch cord B) (grip) --> | *
* |
Thanks much,
Illinois Bill
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org.
