Hi Vit,
I have a manual for this flash that is in pdf format that I could e-mail you
privately if you like. The file size is about 277kb.
In the meantime, maybe I can answer a few questions. On the back of the
flash there is a dial for setting film speed. Once you do that, there is a
window for f stop. There is a blue line that is by the 20ft/6M and a red
line by the 40ft/12M. This is the maximum distance in the respective red
and blue settings. The window for f stop will show you the aperture to use.
For instance, for 100 speed film, the auto setting red says that you should
use an aperture of f/2, and auto setting blue says that you should use an
aperture of f/4.
Let me know if you have any other questions, or if you would like me to
email you a copy of the manual.
Regards,
William in Utah.
> -----Original Message-----
> From: Ing. Vít Richter [SMTP:[EMAIL PROTECTED]]
> Sent: Wednesday, March 07, 2001 4:34 AM
> To: [EMAIL PROTECTED]
> Subject: manual for Vivitar flash?
>
> Hi everyone!
>
> I have a old Pentax camera (Superprogram) and non TTL flash Vivitar 2800 -
> both from second hand.
>
> Does enybody have a manual for this flash?
> I dont know, how the flash operates in non-manual modes
> (on flash it is red and blue) and which is correct setting
> of diaphragm for camera in this flash mode.
>
> Thanks.
> Vit Richter
-
This message is from the Pentax-Discuss Mail List. To unsubscribe,
go to http://www.pdml.net and follow the directions. Don't forget to
visit the Pentax Users' Gallery at http://pug.komkon.org .
