From: "Leon Altoff" > On Mon, 11 Apr 2005 01:30:40 -0400, Andre Langevin wrote: > > >When I attach the ist D cable between camera and computer (mas with > >usb 1), the mouse jams and I cannot get it back unless I unplug the > >camera. The camera is not getting in PC mode either. A known issue? > > Andre > > I'm not aware of this, but here are a couple of things to try. > > If you are running them both through a USB hub, don't. > Try swapping the ports so the mouse is in the port used by the *istD > and the D is in the port used by the mouse. > Update the driver for your USB ports. > > Hope this helps. >
I had this sort of problem as well Andre, that said I also had problems with the USB printer jamming up the mouse when it went into action as well. I tried switching ports, cables, updating drivers and checked motherboard IEQ and interrupts until I was blue in the face but all to no availe - but by all means try :-) In the end I stopped messing about and bought a fast USB 2.0 4 port card and plugged everything except the mouse in to that. Worked like a dream, runs much faster than the USB 1 on the motherboard, and only cost me �15. Rob. > > Leon > > > > > -- > No virus found in this incoming message. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.9.7 - Release Date: 12/04/2005 > > -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.9.7 - Release Date: 12/04/2005
