Don, Gosh, I hope that is all that it is! If you are right Don, a big smack on the kisser to you!
Just to add to things, I tried a 285HV (the big guide number one) using the pc connector on the Wein adapter - no problems. I hope the local Dodd camera has a mai/female pc connector - perhaps Ritz will. I will report back sir. Dave (accessing messages through archive as a digest hasn't come around in a little while) Don Sanderson said: OK here's my guess: 1.) The Novatron requires that the trigger be a certain polarity. 2.) The DS has a circuit that is the other polarity. 3.) The KX uses a regular switch contact so polarity is not an issue. 4.) The 2850 is either correct polarity for the DS, or it doesn't care. Solution: Get or make a reverse polarity adapter for the novatron. this could be just a Male to Female PC cord cut in half and put back together in such a way as to reverse the leads. Some flash makers have reverse polarity adapters, this is probably why! ;-) Don > -----Original Message----- > From: David Weiss [mailto:[EMAIL PROTECTED] > Sent: Friday, September 02, 2005 4:06 PM > To: P. List > Subject: Electronics Experts:*ist DS and Flash: A Desperate cry in the > Wilderness of Ohio > > > Hey, > > Well, I took the advice of several on the list and bought a > Wein adapter in hopes of powering some Novatron Lights. No > good. > > How I tested: > > 1. Put flash adapter on hotshoe > 2. Camera in manual flash mode. > 2. connect to Novatron lights via pc connector. > 3. Hit shutter at various settings, including manual, AV, TV, > nothing from Novatron via pc connector. Shutter speed 1/60 > s. > 4. Hit test button on adapter - Novatron lights go off! > 5. Put Vivitar 2850 on hotshoe of adapter -works fine. > > Put Wein adapter on KX. Able to power both Vivitar flash and > Novatron lights via pc connector. > > Read and re-read manual for camera to increase pressure > behind eyeballs. > > Any ideas? Any custom pre-sets or any other settings? I am > not getting this at all. It seems to me per No. 4 above that > the camera is communicating through the pc connector, that > the adapter is mounted properly through No. 5 above, that the > connector circuitry is correct via my experiences with KX. > > What in the world is the deal? > > Dave > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > * Electronics Experts:*ist DS and Flash: A Desperate cry in the Wilderness o __________________________________ Yahoo! Mail Stay connected, organized, and protected. Take the tour: http://tour.mail.yahoo.com/mailtour.html
