Ralf R. Radermacher wrote:
Toralf Lund <[EMAIL PROTECTED]> wrote:
I've come across a used Nikon LS2000. Any opinions on this model? What
do you reckon a unit (allegedly) in good condition is worth?
I've had one for a few years and I was quite happy with it. Due to the
LED light source, it tends to emphasize film grain much like a condenser
enlarger does in comparison to one with a diffuse light source. This can
become a little problematic with conventional (non-chromogenic) B/W
film.
Right. Sounds like a bit of an issue, since I also do some B&W...
Do note that Nikon never provided software for using their SCSI film
scanners under OS X. [ ... ]
I've never much used NikonScan or Silverfast. The LS-2000 makes a really
nice pair with Vuescan (www.hamrick.com) especially for batch scanning
using the film strip adaptor supplied with the scanner. Results with B/W
film are largely superior to those obtained with the other two programs.
Good. I'm actually thinking about using it with Vuescan under Linux. To
connect it to my little mac, I have to get a USB/firewire to SCSI
adapter, but I have certain doubts about such units, and they probably
cost more than I have to pay for the scanner...
Even though it is not the latest model, I'd still recommend it.
One more thing: after a few years operation, there usually is some
degree of fogging/dust on the mirrors inside the scanner. Here's how to
clean them:
http://www.vad1.com/photo/dirty-scanner/ls2000-cleaning/
Usually, one doesn't have to go all the way described there and it's
enough to clean the mirror shown on the second-last photo (the one at 45
degrees in front of the lens).
OK. Thanks.
- T
