Hi Paul, Check your printer driver. If you're on Windows, it might be that you're using some Windows auto-installed driver for your printer which does not work (in this case you are likely to have several drivers installed for the printer). Choose the correct Epson driver or re-install it. I have seen this happen on a couple of computers.
Antti-Pekka ________________________________________ Antti-Pekka Virjonen Computec Oy R&D Turku Fiskarsinkatu 7 D FIN-20750 Turku Finland Puh. +358 20 7908 300 GSM +358 500 789 753 Telefax +358 20 7908 319 Y-tunnus 1974184-5 Kotipaikka Helsinki www.computec.fi > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of Paul Stenquist > Sent: Sunday, January 21, 2007 6:27 PM > To: Pentax-Discuss Mail List > Subject: OT: Help! R2400 printing problem persists > > I've checked all the variables numerous times, and to the best of my > knowledge, they're correct. The color space of both the file and the > working space is correct. I reinstalled the Epson print drivers. Still > no luck. Here are my settings (PhotoShop CS): > Settings: U.S. Prepress Defaults > > RGB Working Space: Adobe RGB (1998) > Gray: Dot Gain 20% > Spot: Dog Gain 20% > > Color Management Policies > RGB Preserve Embedded Profiles > > Use black point compensation is checked > Use Dither (8-bit per channel images) is checked > > > > Image Colorspace: Adobe RGB (1998) > > > > Print with Preview: > > Source Space: > Document is checked, and ithe indication is Document: Adobe RGB > (1998 > > Pring Space: > Profile: Same as source > > > In the print Box > > The preset is Premium Lustre. If I look under "print settings," I see > Ultra Premium Photo Paper Luster (that's the paper I'm using). The > mode > is advanced. The print quality is Photo RPM and Finest Detail is > checked. Scrolling to "Color Management," I see it's set to off. > > > I'm going to try again, changing Print Space in the Print with Preview > box to Adobe 98 rather than same as source. I'll set intent to > relative > colorimetric. But I'd appreciate any feedback on the above settings. > If > I can't get anywhere, I'm going to change all the ink cartridges. > Thanks for any help. > Paul > > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
