My wireless mode is set to SL1. I see only a choice of SL1 and SL2. I'm not sure what you mean by the grey cursor at the right. I see a switch on the right which can go in the up or down position to vary the function of the buttons. I have that in the up position. Everything else checks out with your list. Thanks. Paul On Feb 24, 2007, at 5:17 PM, Thibouille wrote:
> Just checked on my with my 360FGZ: > > * is the K10D set to wireless (you should enable it in the menu but > you should also set the Fn button and change flash mode to W mode > (wireless) > > * is the integrated flash opened (duh..) > > * is the flash set to channel One ? > > * did rou remember to put back the flash in normal mode (the little > cursor on the right) to the grey color (and not yellow) > > * 540FGZ is set to wireless (between ON and OFF) > > * 540 FGZ wireless mode set to slave (S). > > This is all I can think of. Works well here. > > > > 2007/2/24, Paul Stenquist <[EMAIL PROTECTED]>: >> At least not with the built in flash and the 540 FGZ. I have the >> firmware upgrade. I've tried everything and every variation thereof. >> Just doesn't work. I doubt that I'll send it in for repair. Don't >> really need it, but I thought I might use it instead of an extension >> cable with my stroboframe. Guess not. >> Paul >> >> -- >> PDML Pentax-Discuss Mail List >> [email protected] >> http://pdml.net/mailman/listinfo/pdml_pdml.net >> > > > -- > Thibault Massart aka Thibouille > ---------------------- > K10D,Z1,SuperA,KX,MX, P30t and KR-10x ;) ... > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
