Oh, good you found it...I was just finishing up the thread and realized you might have missed that one.
I did too the first time I was messing with mine. Good deal... -Brendan --- Paul Stenquist <[EMAIL PROTECTED]> wrote: > I finally got it working. Seems there's a little > button on the bottom > of the flash that is labeled M C S, where the flash > can be changed > from master to control or slave. The print in the > LED window is so > tiny my old eyes missed it. I didn't have it set on > slave. The Pentax > manual doesn't make that clear. In fact, I don't > think it mentions > it. But thanks to everyone for their help. > Paul > On Feb 24, 2007, at 6:11 PM, Jack Davis wrote: > > > Just tried the 360 and it works with the little > right edge sliding > > switch on either the white(ch. 1 )or down(slave) > position. > > > > Jack > > --- George Sinos <[EMAIL PROTECTED]> wrote: > > > >> Paul, I tried it on a 360 shortly after the > upgrade and it seemed to > >> work ok. > >> > >> I'm not near the equipment to double-check, but > it seems like I set > >> the camera flash to wireless mode and the 360 to > slave mode. The > >> channel must have been ok, I didn't change it. > >> > >> I've been thinking of getting a 540 for the > swivel head feature. > >> > >> GS > >> <http://georgesphotos.net> > >> > >> On 2/24/07, Paul Stenquist > <[EMAIL PROTECTED]> wrote: > >>> At least not with the built in flash and the 540 > FGZ. I have the > >>> firmware upgrade. I've tried everything and > every variation > >> thereof. > >>> Just doesn't work. I doubt that I'll send it in > for repair. Don't > >>> really need it, but I thought I might use it > instead of an > >> extension > >>> cable with my stroboframe. Guess not. > >>> Paul > >>> > >>> -- > >>> PDML Pentax-Discuss Mail List > >>> [email protected] > >>> http://pdml.net/mailman/listinfo/pdml_pdml.net > >>> > >> > >> -- > >> PDML Pentax-Discuss Mail List > >> [email protected] > >> http://pdml.net/mailman/listinfo/pdml_pdml.net > >> > > > > > > > > > > > ______________________________________________________________________ > > > ______________ > > Need a quick answer? Get one in minutes from > people who know. > > Ask your question on www.Answers.yahoo.com > > > > -- > > PDML Pentax-Discuss Mail List > > [email protected] > > http://pdml.net/mailman/listinfo/pdml_pdml.net > > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > ____________________________________________________________________________________ Never Miss an Email Stay connected with Yahoo! Mail on your mobile. Get started! http://mobile.yahoo.com/services?promote=mail -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
