I have used monopods for many years without heads.
since the thing only has one leg, its pretty easy
to adjust it as needed without a head. I dont even
think I would want a head on one...Verticals can
be done with a simple L-bracket on the camera on a monopod
too.
jco

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Boris Liberman
Sent: Friday, March 09, 2007 12:05 AM
To: Pentax-Discuss Mail List
Subject: Re: Buying a monopod


Godfrey, the Manfrotto that I mentioned is sold without any additions 
(no head, no quick release) for $85 here.

I may have to buy a quick release and a head, but probably later. 
Alternatively I could try to dismount the head and quick release from 
the Slik tripod that I have and attach it to the monopod, though it then

will be ugly and bulky ;-). I do want a ball head though ;-).

Boris



Godfrey DiGiorgi wrote:
> On Mar 8, 2007, at 6:42 AM, Boris Liberman wrote:
>> I've decided I'd buy a monopod. My choices are basically Slik 350 and

>> Manfrotto 680.
>>
>> Any specifics I should be looking for or both are acceptable.
>>
>> Mainly I am going to use it with 80-320 towards 320 mm of course. And

>> generally a bit of (mobile) support won't hurt me.
>>
>> What do you say?
> 
> I was out walking with the DA50-200 the other day and realizing that
> I want a monopod or tripod for any focal length over 100mm in order  
> to ensure adequate camera stability. I've played with the Slik and  
> didn't like it's leg latches much.
> 
> This is the one I'd get:
> 
> Bogen / Manfrotto 681B 3 Section Monopod (Black) with 3229 Swivel/
> Tilt Head (RC2 Quick Release)
> <http://www.bhphotovideo.com/bnh/controller/home? 
> O=WishList.jsp&A=details&Q=&sku=353315&is=REG>
> or
>    http://tinyurl.com/25wve4
> 
> You do need a head, even just a simple one, to allow both horizontal
> and vertical orientation. The QR on the 3229 is compatible with my  
> two other Manfrotto heads (it takes the same plates) and is very  
> sturdy. I have the simpler 3223 model but that doesn't have the QR  
> clamp, which is important for ease of use in the field.
> 
> Godfrey
> 


-- 
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net


-- 
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net

Reply via email to