Dave, I am not that handy, not at all. I will probably use an old tooth brush and canned air as was suggested. Suddenly the solution used by Slick in the tripod that I have (screw-driven locks) does not sound all that silly.
The leg wasn't too expensive, so that if it serves me for a year - I'd be satisfied. Then I will replace it and of course I'll know what to look out for. Thanks. On 3/19/07, David Savage <[EMAIL PROTECTED]> wrote: > Bugger. The only way to get it apart will be to gently knock out that pin. > > Doable but if your not careful that plastic could crack and it would be > useless. > > If this could end up being something that you might have to take apart > often for cleaning, I'd think about replacing that press fit pin with > a 316 stainless steel bolt & nyloc nut. > > Cheers, > > Dave > > On 3/19/07, Boris Liberman <[EMAIL PROTECTED]> wrote: > > I think it is time I started a new thread. > > > > So here is the pic: > > > > http://boris.isra-shop.com/temp/clamp.jpg > > > > Boris > > -- > PDML Pentax-Discuss Mail List > [email protected] > http://pdml.net/mailman/listinfo/pdml_pdml.net > -- Boris -- PDML Pentax-Discuss Mail List [email protected] http://pdml.net/mailman/listinfo/pdml_pdml.net
