If you're noticing it, it's off by a bunch. I don't know why Pentax  
didn't adjust it properly. The adjustments I'm talking about here are  
really fine tuning. I did notice the front focus on the FA 50/1.4,  
which was off by -4 on the K20 scale. The other lenses seemed fine  
before checking.
Paul
On Mar 5, 2008, at 7:37 PM, David J Brooks wrote:

> Hum.
>
> My K10D still does what i sent it in for, my Nikons are fine, what  
> gives.
>
> Dave
>
> On Wed, Mar 5, 2008 at 6:58 PM, Paul Stenquist  
> <[EMAIL PROTECTED]> wrote:
>> So far I've adjusted the FA 50/1.4, the FA 35/2 and now the DA
>>  16-45/4. The 50/1.4 came in at -4. I retested to make sure. Same
>>  result: -4. The FA 35/2 came in at +2. Tonight I did the DA 16-45/4,
>>  and as I suspected, it was closer to dead on at just +1 adjustment.
>>
>>  I simply do a series of shots of crisp typography off the tripod,
>>  wide open (or just slightly stopped down) at seven or more  
>> adjustment
>>  values. I use single point, center autofocus. I convert each shot to
>>  a full-res 16-bit file, line them up on the monitor, then pick the
>>  sharpest one, based on the letter where the center point autofocus
>>  fell. It's easy to see the sharpest at 200% of full resolution. I  
>> can
>>  check a lens in about fifteen minutes.
>>
>>  I like this feature. But the lens-to-lens variation I'm seeing also
>>  explains why Pentax went to this lens-specific adjustment. I'll bet
>>  that in trying to address the complaints of K10D owners they  
>> realized
>>  that adjusting focal point for one lens didn't necessarily make the
>>  camera correct for every lens. I think we have a very good thing  
>> here.
>>  Paul
>>
>>  --
>>  PDML Pentax-Discuss Mail List
>>  [email protected]
>>  http://pdml.net/mailman/listinfo/pdml_pdml.net
>>  to UNSUBSCRIBE from the PDML, please visit the link directly  
>> above and follow the directions.
>>
>
>
>
> -- 
> Equine Photography
> www.caughtinmotion.com
> http://brooksinthecountry.blogspot.com/
> Ontario Canada
>
> -- 
> PDML Pentax-Discuss Mail List
> [email protected]
> http://pdml.net/mailman/listinfo/pdml_pdml.net
> to UNSUBSCRIBE from the PDML, please visit the link directly above  
> and follow the directions.


-- 
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow 
the directions.

Reply via email to