----- Original Message -----
From: "Boris Liberman"
Subject: Problem with Katz Eye and A 50/1.2 on my K-7
Hi!
Yesterday I realized, well I noticed, that my A 50/1.2 misfocuses on
the K-7. I made a shot of a car from about 10 meters and it came out
soft. I shrugged and tried again and it came out soft. Then I
deliberately focused farther from what the screen was indicating was
in focus and it came out just fine. It never happened with my K10D
after I installed KE screen there.
What can I do to effectively solve this issue?
Hi Boris, I ran into this with my K-7 and a Katz Eye.
So far I haven't resovled it.
In my situation, I don't believe the install is at fault, I tried removed
and installed the screen several times with no change in focus innacuracy,
but putting the stock screen back in solved all focus problems.
I suspect that the stock screen is not the same thickness as the Katz Eye.
After Christmas I'm just going to send the camera, the screen and a lens
(probably the 50/1.2) to my local repair shop and let them deal with it.
William Robb
--
PDML Pentax-Discuss Mail List
[email protected]
http://pdml.net/mailman/listinfo/pdml_pdml.net
to UNSUBSCRIBE from the PDML, please visit the link directly above and follow
the directions.
