On 30 Apr 2002 at 9:37, HUDERER Bernd wrote: > Hi Rob, > > AA cells have a diameter of 14mm. And also 1/3AA cells have a diameter of > 14mm. > A cells have a diameter of 17mm -> 1/3A have also 17mm. > > And here's the point I don't understand which cells you used for your > repair. You wrote 225mA capacity. But when I searched in the Internet for > "1/3AA 225mAh" I found nothing. There are only cells with 110mAh ( some > dealers have special memory cells for computer mainboards with up to 180 mAh but > maybe these can't deliever bigger currents ) or cells 1/3A 225mAh but these are > 17x17mm. Can it be that you used the 1/3A ones ? Is there enough space in the > pack for 2 times 3mm more ? I recently bought a used one and it has several dead > cells. I had it once open and IIRC there is only space for cells which could be > a little bit longer but not with bigger diameter ?!? I already ordered new cells > with 110mAh for my pack, so for me the decision is done. As I'm not a > professional, I think the capacity will be enough for my tasks.
Hi Bernd, The cells that I used were definitely Sanyo 1/3AA NiCd cells of 225mAh capacity. The AA cells have a diameter of 14.5mm and were very tight to fit in the charger cavities. The wholesaler from which I bought the cells no longer has the 225mAh cells for sale (they were in the Sanyo High Capacity Cadnica E Series), now I can only find the Cadnica N-110AA 1/3AA 110mAh cells, maybe the 225mAh cells are out of production? Cheers, Rob Studdert HURSTVILLE AUSTRALIA Tel +61-2-9554-4110 UTC(GMT) +10 Hours [EMAIL PROTECTED] http://members.ozemail.com.au/~distudio/publications.html - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
