----- Original Message ----- From: Shel Belinkoff Subject: Re: Sorry,more home proccessing
> > It seems that the developer temperature creeps up a bit during the > course of the process. I sometimes measure the temp at intervals during > the processing, and, IIRC, not having made any notes, every time I've > measured the temperature it's a bit higher at the end of the process > than at the beginning. While handling the tank may contribute some to > this, I wonder how much heat the chemical process puts out, and if that > could be a factor in the upward temperature creep? OTOH, I am very > careful about handling the tank, and do so only minimally and at the > edges or by the securing ring around the cap. I also wonder if a water > bath would mitigate the increase. How hot is your darkroom, down there in sunny California? I do believe that would be your culprit. William Robb - This message is from the Pentax-Discuss Mail List. To unsubscribe, go to http://www.pdml.net and follow the directions. Don't forget to visit the Pentax Users' Gallery at http://pug.komkon.org .
