Hi Leo, sounds like maybe your computer has a hardware or OS problem, these two packages have worked fine together by many users for years. Do you have another computer you can try. Do a memory check at the very least.
Darren Moore > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Leo Potjewijd > > > Having already lost most of the day to that [EMAIL PROTECTED] error I decided > to > experiment a bit with the freshly installed P99SE. Needless > to say all > worked fine after the reinstall.... > Even the database I opened just before the problem occurred > proved not to > be a/the problem. > > But after using Camtastic the problem re-appeared..... No > other programs > (apart from email) used in between, so the culprit must be Camtastic. > > This leads to the 'good news-bad news' bit: the good news is > that my system > works again. The bad news: I'm stuck with more questions than before. > > Why does Camtastic (3.0.4, shipped with P99SE) mess up my Protel > installation (more specific: the PCB part)? > How do I prevent that? I need Camtastic to examine/modify my > Gerbers; or > can anyone reccommend an alternative with roughly the same > functionality? > > Still, any input is greatly appreceated. > > Leo Potjewijd > hardware designer > Integrated Engineering B.V. > > [EMAIL PROTECTED] > +31 20 4620700 ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[EMAIL PROTECTED] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
