Don

The cards I am using are a Radeon X300 PCIx and a nVidia GeForce MX420 in
the PCI slot

But I got it a bit wrong, sorry, the X300 is being used as 1 x DVI 1 x RGB
and the nVidia as RGB.

It was the Parhelia that I used as 2 x DVI and when I updated the
workstation it did not have an AGP slot to use it in! it came with the X300
already fitted so I gave this config a try and it works well.

Actually I have seen less graphics and redraw related glitches than I did
with the Matrox card, but that could just as easily be my own perception.

John

> -----Original Message-----
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of Don Ingram
> Sent: 22 February 2005 23:32
> To: Protel EDA Discussion List
> Subject: Re: [PEDA] Dual LCD Monitor support with PCI express
> 
> John A. Ross [Design] wrote:
> 
> >>-----Original Message-----
> >>From: Don Ingram [mailto:[EMAIL PROTECTED]
> >>Sent: 22 February 2005 14:39
> >>To: Protel EDA Discussion List
> >>Subject: [PEDA] Dual LCD Monitor support with PCI express
> >>
> >>Hi All,
> >>
> >>Has anyone tried using a pair of the new PCI Express 
> Graphics cards to 
> >>drive a DVI port each?  Any advice for young players...
> >>
> >>( Keep to Matrox Luke... Keep to Matrox Luke...;- )
> >>    
> >>
> >
> >Keep to Matrox ;-)
> >
> >
> >Certainly I would not berate the G550/G400/G200/G100/PCI 
> Milleniums I 
> >have used historically, in fact I think the G400/PCI 
> Millenium with mem 
> >add on was the most stable I had, after the G550 I was not so happy.
> >
> >  
> >
> Oh...  The Matrox card I am looking at is the P650 - for the 
> dual DVI ports. 
> 
> The reason I looked at the 2 x PCIex graphics cards was that 
> two Gigabyte / NVidia 6200 PCIex single DVI port cards cost 
> less than the one Matrox card.  Question is what the grief 
> tax will be on the purchase when Prottle barfs on the drivers 
> and how happily WinXP makes them play together.
> 
> Cheers
> 
> Don
> 
>  
> ____________________________________________________________
> You are subscribed to the PEDA discussion forum
> 
> To Post messages:
> mailto:[email protected]
> 
> Unsubscribe and Other Options:
> http://techservinc.com/mailman/listinfo/peda_techservinc.com
> 
> Browse or Search Old Archives (2001-2004):
> http://www.mail-archive.com/[email protected]
>  
> Browse or Search Current Archives (2004-Current):
> http://www.mail-archive.com/[email protected]
> 
> 


 
____________________________________________________________
You are subscribed to the PEDA discussion forum

To Post messages:
mailto:[email protected]

Unsubscribe and Other Options:
http://techservinc.com/mailman/listinfo/peda_techservinc.com

Browse or Search Old Archives (2001-2004):
http://www.mail-archive.com/[email protected]
 
Browse or Search Current Archives (2004-Current):
http://www.mail-archive.com/[email protected]

Reply via email to