In a message dated 2005-03-09 08:54:03 PM Eastern Standard Time, [EMAIL PROTECTED] writes:
> Checked the netlist. It's clean - only one GND net. Just for the hey of > it, I did a "Clear all nets", then re-updated the pcb from the schematics. > The polygons show up as NoNet, so I changed them to GND, and let them > rebuild. Then dropped a via in an empty space connecting top and bottom > polys. Rebuilt them ... > > Still bloody isolated. AND it still shows a ratsnest line to the nearest > GND pad ... > Are you sure your polygons are on a copper layer? If you've somehow gotten them on a mech layer or overlay, etc, that would explain the behavior you're seeing. I've been bitten this way in 99SE, because placing a polygon doesn't automatically place it on the current layer - the layer is a separate setting within the polygon function. Steve Hendrix ____________________________________________________________ You are subscribed to the PEDA discussion forum To Post messages: mailto:[email protected] Unsubscribe and Other Options: http://techservinc.com/mailman/listinfo/peda_techservinc.com Browse or Search Old Archives (2001-2004): http://www.mail-archive.com/[email protected] Browse or Search Current Archives (2004-Current): http://www.mail-archive.com/[email protected]
