Mark Rogers wrote:
I've sent a copy of this home to remind me to check the changes I
made, which I'll forward here when I have them (but that could be a
couple of days).
The information I have from home is...
First off, try and generate the right xorg entries yourself from one of
the following sites:
http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
http://zaph.com/Modeline/
This will require having some information about the monitor that likely
came with it or can be found online from the model number.
If you're still stuck, the relevant bits from my xorg.conf are below. If
you're not sure how to use the information ask first, otherwise you'll
find it even harder to sort out later!
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
Defaultdepth 24
Option "metamodes" "1400x1050 +0+0; 800x600 +0+0;
640x480 +0+0"
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024"
"1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Monitor"
# HorizSync source: xconfig, VertRefresh source: xconfig
Identifier "Monitor0"
Vendorname "Unknown"
Modelname "CRT-0"
Horizsync 30.0 - 70.0
Vertrefresh 50.0 - 60.0
modeline "1400x1050" 123.5 1400 1464 1616 1896 1050 1050 1052 1089
+hsync +vsync
Option "DPMS"
EndSection
--
Mark Rogers // More Solutions Ltd (Peterborough Office) // 0845 45 89 555
Registered in England (0456 0902) at 13 Clarke Rd, Milton Keynes, MK1 1LG
_______________________________________________
Peterboro mailing list
[email protected]
https://mailman.lug.org.uk/mailman/listinfo/peterboro
