Mark

In regards to the following setting:

Vertrefresh     50.0    -       60.0

Shouldn't this be set higher - i.e. 160?


Regards,
Ben Hayes
Senior IT Support Analyst
Ideal Shopping Direct Plc
(DDI) 08700 780 870
 
Registered Office: Ideal Home House, Newark Road, Peterborough, PE1 5WG,
UK. Registered in England No. 1534758
P Please consider the environment; don't print this e-mail unless you
really need to.

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mark Rogers
Sent: 07 February 2008 09:01
To: Peterborough LUG - No commercial posts
Subject: Re: [Peterboro] driver graphic card

Mark Rogers wrote:
> I've sent a copy of this home to remind me to check the changes I 
> made, which I'll forward here when I have them (but that could be a 
> couple of days).

The information I have from home is...

First off, try and generate the right xorg entries yourself from one of
the following sites:
    http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
    http://zaph.com/Modeline/

This will require having some information about the monitor that likely
came with it or can be found online from the model number.

If you're still stuck, the relevant bits from my xorg.conf are below. If
you're not sure how to use the information ask first, otherwise you'll
find it even harder to sort out later!

Section "Screen"
       Identifier      "Screen0"
       Device          "Videocard0"
       Monitor         "Monitor0"
       Defaultdepth    24
       Option          "metamodes"     "1400x1050 +0+0; 800x600 +0+0; 
640x480 +0+0"
       SubSection "Display"
               Depth   24
               Modes           "1600x1200"     "1280x1024"     
"1024x768"      "800x600"       "640x480"
       EndSubSection
EndSection

Section "Monitor"
             # HorizSync source: xconfig, VertRefresh source: xconfig
       Identifier      "Monitor0"
       Vendorname      "Unknown"
       Modelname       "CRT-0"
       Horizsync       30.0    -       70.0
       Vertrefresh     50.0    -       60.0
 modeline  "1400x1050" 123.5 1400 1464 1616 1896 1050 1050 1052 1089 
+hsync +vsync
       Option          "DPMS"
EndSection


--
Mark Rogers // More Solutions Ltd (Peterborough Office) // 0845 45 89
555 Registered in England (0456 0902) at 13 Clarke Rd, Milton Keynes,
MK1 1LG


_______________________________________________
Peterboro mailing list
[email protected]
https://mailman.lug.org.uk/mailman/listinfo/peterboro

_______________________________________________
Peterboro mailing list
[email protected]
https://mailman.lug.org.uk/mailman/listinfo/peterboro

Reply via email to