Well all linux [test] boxes are equivalent. But each of us might have different soft env than whats in petsc account.
I'll check if I can reproduce. Perhaps its because of some inconsistant software env.. [system openmpi + gcc-4.9] Satish On Mon, 2 Mar 2015, Barry Smith wrote: > > Run with valgrind? > > Run on the same machine as test actually fails on? Yes, there should be a > trivial way for all of us to access all the test machines to debug stuff! > > Barry > > > On Mar 2, 2015, at 5:36 PM, [email protected] wrote: > > > > I cannot reproduce it, even with same configure options on petsc machine: > > > > Configure Options: --configModules=PETSc.Configure > > --optionsModule=config.compilerOptions --download-metis > > --download-openmpich --with-debugging=0 --with-cc=mpicc.openmpi > > --with-cxx=mpicxx.openmpi --with-fc=mpif90.openmpi > > --with-mpiexec=mpiexec.openmpi --download-fblaslapack=1 --download-mumps > > --download-parmetis --download-scalapack --download-elemental > > --with-cxx-dialect=C++11 --download-cmake PETSC_ARCH=arch-openmpi-o > > > > Any suggestion? > > > > Hong > > > > On Mon, Mar 2, 2015 at 2:34 PM, Barry Smith <[email protected]> wrote: > > http://ftp.mcs.anl.gov/pub/petsc/nightlylogs/archive/2015/03/01/examples_master_arch-linux-pkgs-opt_crank.log > > > > ******* Testing: testexamples_ELEMENTAL ******* > > 0a1,55 > > > [0]PETSC ERROR: --------------------- Error Message > > > -------------------------------------------------------------- > > > [0]PETSC ERROR: Object is in wrong state > > > [0]PETSC ERROR: [1]PETSC ERROR: --------------------- Error Message > > > -------------------------------------------------------------- > > > [1]PETSC ERROR: Object is in wrong state > > > [1]PETSC ERROR: C != D > > > [1]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html > > > for trouble shooting. > > > [1]PETSC ERROR: Petsc Development GIT revision: v3.5.3-2131-g5620d6d GIT > > > Date: 2015-02-28 21:26:35 -0600 > > > [1]PETSC ERROR: ./ex104 on a arch-linux-pkgs-opt named crank by petsc Sun > > > Mar 1 14:11:43 2015 > > > [1]PETSC ERROR: Configure options --with-debugging=0 > > > --with-cc=mpicc.openmpi --with-cxx=mpicxx.openmpi > > > --with-fc=mpif90.openmpi --with-mpiexec=mpiexec.openmpi > > > --download-fblaslapack=1 --download-hypre=1 --download-cmake=1 > > > --download-metis=1 --download-parmetis=1 --download-ptscotch=1 > > > --download-suitesparse=1 --download-triangle=1 --download-superlu=1 > > > --download-superlu_dist=1 --download-scalapack=1 --download-mumps=1 > > > --download-elemental=1 --with-cxx-dialect=C++11 --download-spai=1 > > > --download-parms=1 --download-moab=1 --download-chaco=1 --download-saws > > > --with-no-output -PETSC_ARCH=arch-linux-pkgs-opt > > > -PETSC_DIR=/sandbox/petsc/petsc.clone > > > [1]PETSC ERROR: #1 main() line 67 in > > > /sandbox/petsc/petsc.clone/src/mat/examples/tests/ex104.c > > > [2]PETSC ERROR: --------------------- Error Message > > > -------------------------------------------------------------- > > > [2]PETSC ERROR: Object is in wrong state > > > [2]PETSC ERROR: C != D > > > [2]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html > > > for trouble shooting. > > > [2]PETSC ERROR: Petsc Development GIT revision: v3.5.3-2131-g5620d6d GIT > > > Date: 2015-02-28 21:26:35 -0600 > > > [2]PETSC ERROR: ./ex104 on a arch-linux-pkgs-opt named crank by petsc Sun > > > Mar 1 14:11:43 2015 > > > [2]PETSC ERROR: Configure options --with-debugging=0 > > > --with-cc=mpicc.openmpi --with-cxx=mpicxx.openmpi > > > --with-fc=mpif90.openmpi --with-mpiexec=mpiexec.openmpi > > > --download-fblaslapack=1 --download-hypre=1 --download-cmake=1 > > > --download-metis=1 --download-parmetis=1 --download-ptscotch=1 > > > --download-suitesparse=1 --download-triangle=1 --download-superlu=1 > > > --download-superlu_dist=1 --download-scalapack=1 --download-mumps=1 > > > --download-elemental=1 --with-cxx-dialect=C++11 --download-spai=1 > > > --download-parms=1 --download-moab=1 --download-chaco=1 --download-saws > > > --with-no-output -PETSC_ARCH=arch-linux-pkgs-opt > > > -PETSC_DIR=/sandbox/petsc/petsc.clone > > > [2]PETSC ERROR: #1 main() line 67 in > > > /sandbox/petsc/petsc.clone/src/mat/examples/tests/ex104.c > > > [2]PETSC ERROR: PETSc Option Table entries: > > > [2]PETSC ERROR: -display 140.221.10.20:0.0 > > > [2]PETSC ERROR: -malloc_dump > > > C != D > > > [0]PETSC ERROR: See http://www.mcs.anl.gov/petsc/documentation/faq.html > > > for trouble shooting. > > > [0]PETSC ERROR: Petsc Development GIT revision: v3.5.3-2131-g5620d6d GIT > > > Date: 2015-02-28 21:26:35 -0600 > > > [0]PETSC ERROR: ./ex104 on a arch-linux-pkgs-opt named crank by petsc Sun > > > Mar 1 14:11:43 2015 > > > [0]PETSC ERROR: Configure options --with-debugging=0 > > > --with-cc=mpicc.openmpi --with-cxx=mpicxx.openmpi > > > --with-fc=mpif90.openmpi --with-mpiexec=mpiexec.openmpi > > > --download-fblaslapack=1 --download-hypre=1 --download-cmake=1 > > > --download-metis=1 --download-parmetis=1 --download-ptscotch=1 > > > --download-suitesparse=1 --download-triangle=1 --download-superlu=1 > > > --download-superlu_dist=1 --download-scalapack=1 --download-mumps=1 > > > --download-elemental=1 --with-cxx-dialect=C++11 --download-spai=1 > > > --download-parms=1 --download-moab=1 --download-chaco=1 --download-saws > > > --with-no-output -PETSC_ARCH=arch-linux-pkgs-opt > > > -PETSC_DIR=/sandbox/petsc/petsc.clone > > > [0]PETSC ERROR: #1 main() line 67 in > > > /sandbox/petsc/petsc.clone/src/mat/examples/tests/ex104.c > > > [0]PETSC ERROR: PETSc Option Table entries: > > > [0]PETSC ERROR: -display 140.221.10.20:0.0 > > > [0]PETSC ERROR: -malloc_dump > > > [0]PETSC ERROR: -mat_type elemental > > > [0]PETSC ERROR: ----------------End of Error Message -------send entire > > > error message to [email protected] > > > [1]PETSC ERROR: PETSc Option Table entries: > > > [1]PETSC ERROR: -display 140.221.10.20:0.0 > > > [1]PETSC ERROR: -malloc_dump > > > [1]PETSC ERROR: -mat_type elemental > > > [1]PETSC ERROR: ----------------End of Error Message -------send entire > > > error message to [email protected] > > > [2]PETSC ERROR: -mat_type elemental > > > [2]PETSC ERROR: ----------------End of Error Message -------send entire > > > error message to [email protected] > > > -------------------------------------------------------------------------- > > > MPI_ABORT was invoked on rank 2 in communicator MPI_COMM_WORLD > > > with errorcode 73. > > > > > > NOTE: invoking MPI_ABORT causes Open MPI to kill all MPI processes. > > > You may or may not see output from other processes, depending on > > > exactly when Open MPI kills them. > > > -------------------------------------------------------------------------- > > > -------------------------------------------------------------------------- > > > mpiexec.openmpi has exited due to process rank 2 with PID 21714 on > > > node crank exiting without calling "finalize". This may > > > have caused other processes in the application to be > > > terminated by signals sent by mpiexec.openmpi (as reported here). > > > -------------------------------------------------------------------------- > > > [crank:21711] 2 more processes have sent help message help-mpi-api.txt / > > > mpi-abort > > > [crank:21711] Set MCA parameter "orte_base_help_aggregate" to 0 to see > > > all help / error messages > > /sandbox/petsc/petsc.clone/src/mat/examples/tests > > Possible problem with ex104_elemental_2, diffs above > > ========================================= > > 6c6,30 > > < Test LU Solver > > --- > > > terminate called after throwing an instance of 'std::logic_error' > > > what(): A was not numerically HPD > > > > > > [crank:21810] *** Process received signal *** > > > [crank:21810] Signal: Aborted (6) > > > [crank:21810] Signal code: (-6) > > > [crank:21810] [ 0] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0) > > > [0x2b997a66bcb0] > > > [crank:21810] [ 1] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35) > > > [0x2b997a8af0d5] > > > [crank:21810] [ 2] /lib/x86_64-linux-gnu/libc.so.6(abort+0x17b) > > > [0x2b997a8b283b] > > > [crank:21810] [ 3] > > > /nfs/software/linux-ubuntu_precise_amd64/apps/packages/gcc-4.9.0/lib64/libstdc++.so.6(_ZN9__gnu_cxx27__verbose_terminate_handlerEv+0x175) > > > [0x2b9976a592d5] > > > [crank:21810] [ 4] > > > /nfs/software/linux-ubuntu_precise_amd64/apps/packages/gcc-4.9.0/lib64/libstdc++.so.6(+0x5e336) > > > [0x2b9976a57336] > > > [crank:21810] [ 5] > > > /nfs/software/linux-ubuntu_precise_amd64/apps/packages/gcc-4.9.0/lib64/libstdc++.so.6(+0x5e381) > > > [0x2b9976a57381] > > > [crank:21810] [ 6] > > > /nfs/software/linux-ubuntu_precise_amd64/apps/packages/gcc-4.9.0/lib64/libstdc++.so.6(+0x5e598) > > > [0x2b9976a57598] > > > [crank:21810] [ 7] > > > /sandbox/petsc/petsc.clone/arch-linux-pkgs-opt/lib/libEl.so(_ZN2El10LogicErrorIJPKcEEEvDpT_+0xaa) > > > [0x2b9974d9dffa] > > > [crank:21810] [ 8] > > > /sandbox/petsc/petsc.clone/arch-linux-pkgs-opt/lib/libEl.so(_ZN2El8CholeskyIdEEvNS_14UpperOrLowerNS12UpperOrLowerERNS_6MatrixIT_EE+0x281) > > > [0x2b997557b391] > > > [crank:21810] [ 9] > > > /sandbox/petsc/petsc.clone/arch-linux-pkgs-opt/lib/libEl.so(_ZN2El8cholesky5UVar3IdEEvRNS_18AbstractDistMatrixIT_EE+0x20c) > > > [0x2b997558460c] > > > [crank:21810] [10] > > > /sandbox/petsc/petsc.clone/arch-linux-pkgs-opt/lib/libpetsc.so.3.05(+0x56fd37) > > > [0x2b9973546d37] > > > [crank:21810] [11] > > > /sandbox/petsc/petsc.clone/arch-linux-pkgs-opt/lib/libpetsc.so.3.05(MatCholeskyFactor+0x230) > > > [0x2b99732a79aa] > > > [crank:21810] [12] ./ex145(main+0x24b7) [0x4044ff] > > > [crank:21810] [13] > > > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x2b997a89a76d] > > > [crank:21810] [14] ./ex145() [0x401f59] > > > [crank:21810] *** End of error message *** > > > -------------------------------------------------------------------------- > > > mpiexec.openmpi noticed that process rank 5 with PID 21810 on node crank > > > exited on signal 6 (Aborted). > > > -------------------------------------------------------------------------- > > /sandbox/petsc/petsc.clone/src/mat/examples/tests > > Possible problem with ex145_2, diffs above > > ========================================= > > > > > >
