Try calling E.setUp() before replacing the matrix. But note that E.setUp() will try to build the preconditioner, so you will have to set PC=none and later change it to lu.
Also note that in Krylov methods with exact shift-and-invert (LU) the preconditioner matrix should be exactly the same as A-sigma*B, otherwise you may get unexpected results. Davidson-type methods allow using a different preconditioner. Jose > El 1 ago 2018, a las 10:11, Michael Werner <[email protected]> escribió: > > Hello, > > I'm trying to find the smallest eigenvalues of a linear system created by CFD > simulations. To reduce memory requirements, I want to use a shell matrix > (A_Shell) to provide the matrix-vector product, and a lower-order explicit > matrix (P) as preconditioner. As I'm solving a generalized problem, I'm also > passing a second explicit matrix (B) to the EPS. However, I don't see a way > to provide the explicit preconditioning matrix to the EPS. > > I'm using the following options: -st_type sinvert -st_pc_type lu -st_matmode > shell -eps_target 0.01 -eps_target_real My Python code looks like this: > > E = SLEPc.EPS().create(comm=PETSc.COMM_WORLD) > E.setOperators(A_Shell, B) > E.setProblemType(SLEPc.EPS.ProblemType.GNHEP) > st = E.getST() > ksp = st.getKSP() > pc = ksp.getPC() > pc.setOperators(A_Shell, P) > E.setFromOptions() > E.solve() > > If I run this, I get the following error: >> Error: error code 92 >> [2] EPSSolve() line 135 in >> /home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/eps/interface/epssolve.c >> [2] EPSSetUp() line 263 in >> /home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/eps/interface/epssetup.c >> [2] STSetUp() line 271 in >> /home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/sys/classes/st/interface/stsolve.c >> [2] STSetUp_Sinvert() line 132 in >> /home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/sys/classes/st/impls/sinvert/sinvert.c >> [2] KSPSetUp() line 381 in >> /home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/ksp/ksp/interface/itfunc.c >> [2] PCSetUp() line 923 in >> /home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/ksp/pc/interface/precon.c >> [2] PCSetUp_LU() line 113 in >> /home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/ksp/pc/impls/factor/lu/lu.c >> [2] MatGetFactor() line 4332 in >> /home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/mat/interface/matrix.c >> [2] See http://www.mcs.anl.gov/petsc/documentation/linearsolvertable.html >> for possible LU and Cholesky solvers >> [2] MatSolverType mumps does not support matrix type shell > > I also tried setting up the preconditioner in advance, but that didn't work > either and produced the same errors as above: > > pc = PETSc.PC().create(comm=PETSc.COMM_WORLD) > pc.setOperators(A_Shell, P) > pc.setFromOptions() > pc.setUp() > > E = SLEPc.EPS().create(comm=PETSc.COMM_WORLD) > E.setOperators(A_Shell, B) > E.setProblemType(SLEPc.EPS.ProblemType.GNHEP) > ksp = E.getKSP() > ksp.setPC(pc) > E.setFromOptions() > E.solve() > > If I simply try to solve a KSP with those two matrices, it works without any > problems.
