Interesting, I will have a look at those papers, thank you. I'm
still trying to get the Davidson methods to work, because for big
matrices I can't use the krylov methods anymore due to limited
memory.
Kind regards,
Michael
Jose E. Roman writes:
If Krylov methods work for you then no need to worry about
Davidson methods. JD has many parameters that influence
convergence. Also, it relies on having a good preconditioner,
maybe ASM is not enough for your problem. Some time ago with we
used the pARMS preconditioner, see
https://doi.org/10.1016/j.cpc.2011.12.018 - but the results are
problem dependent. Also, you can try GD instead of JD, which is
simpler and often gives better performance. See a detailed
explanation here: https://doi.org/10.1145/2543696
Jose
El 1 ago 2018, a las 10:43, Michael Werner
<[email protected]> escribió:
Thanks for the quick reply, your suggestion worked
perfect. Concerning your remark about Davidson-type methods: I
already tried that, however I had problems getting them to
converge to the expected eigenvalues. Even when I was using the
full explicit system matrix and the options suggested in the
slepc manual (-st_type precond -eps_type jd -st_pc_type asm
-st_ksp_type bcgsl -st_ksp_rtol 0.001 -eps_target 0.01
-eps_target_real), the results were always "hit-and-miss", the
results didn't reliably converge towards the eigenvalues
suggested by the exact shift-and-invert.
Kind regards,
Michael
Jose E. Roman writes:
Try calling E.setUp() before replacing the matrix. But note
that E.setUp() will try to build the preconditioner, so you
will have to set PC=none and later change it to lu.
Also note that in Krylov methods with exact shift-and-invert
(LU) the preconditioner matrix should be exactly the same as
A-sigma*B, otherwise you may get unexpected
results. Davidson-type methods allow using a different
preconditioner.
Jose
El 1 ago 2018, a las 10:11, Michael Werner
<[email protected]> escribió:
Hello,
I'm trying to find the smallest eigenvalues of a linear
system created by CFD simulations. To reduce memory
requirements, I want to use a shell matrix (A_Shell) to
provide the matrix-vector product, and a lower-order explicit
matrix (P) as preconditioner. As I'm solving a generalized
problem, I'm also passing a second explicit matrix (B) to the
EPS. However, I don't see a way to provide the explicit
preconditioning matrix to the EPS.
I'm using the following options: -st_type sinvert -st_pc_type
lu -st_matmode shell -eps_target 0.01 -eps_target_real My
Python code looks like this:
E = SLEPc.EPS().create(comm=PETSc.COMM_WORLD)
E.setOperators(A_Shell, B)
E.setProblemType(SLEPc.EPS.ProblemType.GNHEP)
st = E.getST()
ksp = st.getKSP()
pc = ksp.getPC()
pc.setOperators(A_Shell, P)
E.setFromOptions()
E.solve()
If I run this, I get the following error:
Error: error code 92
[2] EPSSolve() line 135 in
/home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/eps/interface/epssolve.c
[2] EPSSetUp() line 263 in
/home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/eps/interface/epssetup.c
[2] STSetUp() line 271 in
/home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/sys/classes/st/interface/stsolve.c
[2] STSetUp_Sinvert() line 132 in
/home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/sys/classes/st/impls/sinvert/sinvert.c
[2] KSPSetUp() line 381 in
/home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/ksp/ksp/interface/itfunc.c
[2] PCSetUp() line 923 in
/home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/ksp/pc/interface/precon.c
[2] PCSetUp_LU() line 113 in
/home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/ksp/pc/impls/factor/lu/lu.c
[2] MatGetFactor() line 4332 in
/home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/mat/interface/matrix.c
[2] See
http://www.mcs.anl.gov/petsc/documentation/linearsolvertable.html
for possible LU and Cholesky solvers
[2] MatSolverType mumps does not support matrix type shell
I also tried setting up the preconditioner in advance, but
that didn't work either and produced the same errors as
above:
pc = PETSc.PC().create(comm=PETSc.COMM_WORLD)
pc.setOperators(A_Shell, P)
pc.setFromOptions()
pc.setUp()
E = SLEPc.EPS().create(comm=PETSc.COMM_WORLD)
E.setOperators(A_Shell, B)
E.setProblemType(SLEPc.EPS.ProblemType.GNHEP)
ksp = E.getKSP()
ksp.setPC(pc)
E.setFromOptions()
E.solve()
If I simply try to solve a KSP with those two matrices, it
works without any problems.