If Krylov methods work for you then no need to worry about Davidson methods. JD has many parameters that influence convergence. Also, it relies on having a good preconditioner, maybe ASM is not enough for your problem. Some time ago with we used the pARMS preconditioner, see https://doi.org/10.1016/j.cpc.2011.12.018 - but the results are problem dependent. Also, you can try GD instead of JD, which is simpler and often gives better performance. See a detailed explanation here: https://doi.org/10.1145/2543696
Jose > El 1 ago 2018, a las 10:43, Michael Werner <[email protected]> escribió: > > > Thanks for the quick reply, your suggestion worked perfect. Concerning your > remark about Davidson-type methods: I already tried that, however I had > problems getting them to converge to the expected eigenvalues. Even when I > was using the full explicit system matrix and the options suggested in the > slepc manual (-st_type precond -eps_type jd -st_pc_type asm -st_ksp_type > bcgsl -st_ksp_rtol 0.001 -eps_target 0.01 -eps_target_real), the results were > always "hit-and-miss", the results didn't reliably converge towards the > eigenvalues suggested by the exact shift-and-invert. > > Kind regards, > Michael > > Jose E. Roman writes: > >> Try calling E.setUp() before replacing the matrix. But note that E.setUp() >> will try to build the preconditioner, so you will have to set PC=none and >> later change it to lu. >> >> Also note that in Krylov methods with exact shift-and-invert (LU) the >> preconditioner matrix should be exactly the same as A-sigma*B, otherwise you >> may get unexpected results. Davidson-type methods allow using a different >> preconditioner. >> >> Jose >> >>> El 1 ago 2018, a las 10:11, Michael Werner <[email protected]> escribió: >>> Hello, >>> I'm trying to find the smallest eigenvalues of a linear system created by >>> CFD simulations. To reduce memory requirements, I want to use a shell >>> matrix (A_Shell) to provide the matrix-vector product, and a lower-order >>> explicit matrix (P) as preconditioner. As I'm solving a generalized >>> problem, I'm also passing a second explicit matrix (B) to the EPS. However, >>> I don't see a way to provide the explicit preconditioning matrix to the EPS. >>> I'm using the following options: -st_type sinvert -st_pc_type lu >>> -st_matmode shell -eps_target 0.01 -eps_target_real My Python code looks >>> like this: >>> E = SLEPc.EPS().create(comm=PETSc.COMM_WORLD) >>> E.setOperators(A_Shell, B) >>> E.setProblemType(SLEPc.EPS.ProblemType.GNHEP) >>> st = E.getST() >>> ksp = st.getKSP() >>> pc = ksp.getPC() >>> pc.setOperators(A_Shell, P) >>> E.setFromOptions() >>> E.solve() >>> If I run this, I get the following error: >>>> Error: error code 92 >>>> [2] EPSSolve() line 135 in >>>> /home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/eps/interface/epssolve.c >>>> [2] EPSSetUp() line 263 in >>>> /home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/eps/interface/epssetup.c >>>> [2] STSetUp() line 271 in >>>> /home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/sys/classes/st/interface/stsolve.c >>>> [2] STSetUp_Sinvert() line 132 in >>>> /home/conda/feedstock_root/build_artifacts/slepc_1531127798016/work/src/sys/classes/st/impls/sinvert/sinvert.c >>>> [2] KSPSetUp() line 381 in >>>> /home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/ksp/ksp/interface/itfunc.c >>>> [2] PCSetUp() line 923 in >>>> /home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/ksp/pc/interface/precon.c >>>> [2] PCSetUp_LU() line 113 in >>>> /home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/ksp/pc/impls/factor/lu/lu.c >>>> [2] MatGetFactor() line 4332 in >>>> /home/conda/feedstock_root/build_artifacts/petsc_1530637062977/work/src/mat/interface/matrix.c >>>> [2] See http://www.mcs.anl.gov/petsc/documentation/linearsolvertable.html >>>> for possible LU and Cholesky solvers >>>> [2] MatSolverType mumps does not support matrix type shell >>> I also tried setting up the preconditioner in advance, but that didn't work >>> either and produced the same errors as above: >>> pc = PETSc.PC().create(comm=PETSc.COMM_WORLD) >>> pc.setOperators(A_Shell, P) >>> pc.setFromOptions() >>> pc.setUp() >>> E = SLEPc.EPS().create(comm=PETSc.COMM_WORLD) >>> E.setOperators(A_Shell, B) >>> E.setProblemType(SLEPc.EPS.ProblemType.GNHEP) >>> ksp = E.getKSP() >>> ksp.setPC(pc) >>> E.setFromOptions() >>> E.solve() >>> If I simply try to solve a KSP with those two matrices, it works without >>> any problems. >
