I have one of the Electrolas (a XVI). I have seen those bulbs on various
occasions, and I'm inclined to believe that the original ones were frosted,
though I have nothing to back up that information. I'm inclined to believe
that, because a clear bulb will tend to give the operator a strong glare, 
a frosted bulb would give a softer light in the playing compartment. If you
can find one of those early bulbs, even burned out, try to determine the
wattage. I have a feeling that they were about 10 watts. 

And, tou'd play Hell, finding a bulb with the evacuation stem on the top!!


> [Original Message]
> From: Daniel Melvin <[email protected]>
> To: Antique Phonograph List <[email protected]>
> Date: 11/18/2007 6:16:35 PM
> Subject: Re: [Phono-L] Electrola light bulbs
>
> I don't think I was specific enough. It's the machine is a 1921 Victorla 
> XVII Electrola with a bulb inside. The buld is 110 volt and has what is
now 
> called a candelobra base that a normal night light fits in. What I'm 
> wondering is if there was a certain type of bulb that would have been
used. 
> I don't think most of the modern bulbs that fit this type of fixture
would 
> have existed in 1921.
>
> Dan
>
> There are all kinds of lights that work
> ----- Original Message ----- 
> From: "Douglas Houston" <[email protected]>
> To: "Antique Phonograph List" <[email protected]>
> Sent: Sunday, November 18, 2007 2:07 PM
> Subject: Re: [Phono-L] Electrola light bulbs
>
>
> > Hold on a minute! There could be a couple of answers to this one.
> >
> > First, it'd be good to know the model number of the Electrola. Is this
the
> > tubular bulb in the phono compartment of such as the 9-18?  Or, might
it 
> > be
> > the dial light in the RE-45, 75?  If nit's the inside light, as
mentioned
> > in the original question, it's the tubular light. The smallest wattage
> > reting that I can find is about 15 watts. They seem to work out
acceptably
> > in the cabinets. I believe that the original bulbs were nearer to 10
watts
> > or so, but you just don't seem to find them  these days. Best thing to
do
> > is to use the smallest wattage you can find. It doesn't take much to
light
> > up those playing compartments.
> >
> >
> >> [Original Message]
> >> From: Andrew Baron <[email protected]>
> >> To: Antique Phonograph List <[email protected]>
> >> Date: 11/18/2007 4:49:35 PM
> >> Subject: Re: [Phono-L] Electrola light bulbs
> >>
> >> Type 41 pilot lamp (screw base, 2.5 volt) if the socket is on the 2.5
> >> volt (tube filament winding) part of the power transformer.  If on the
> >> 5 volt part (rectifier filament), a type 46 (6.3 volt) should work.
> >> Both types should be available from Antique Electronic Supply and
> >> other sources.
> >>
> >> Andy Baron
> >>
> >>
> >> On Nov 18, 2007, at 2:38 PM, Daniel Melvin wrote:
> >>
> >> > Does anyone know what type of bulbs were used in 20s Eletrolas on
> >> > the inside light? There are a number of moderm bulbs that fit the
> >> > fixture, but I'm curious if the style of what would have been used
> >> > then is still available anywhere?
> >> >
> >> > Dan
> >> > _______________________________________________
> >> > Phono-L mailing list
> >> > http://phono-l.oldcrank.org
> >>
> >> _______________________________________________
> >> Phono-L mailing list
> >> http://phono-l.oldcrank.org
> >
> >
> >
> > _______________________________________________
> > Phono-L mailing list
> > http://phono-l.oldcrank.org 
>
> _______________________________________________
> Phono-L mailing list
> http://phono-l.oldcrank.org


Reply via email to