My BF has a 2/4 min conversion.I believe mine came from the factory with
it.There is a slotted stud in the side which is used to engage the gearing
by means of a pull knod.One speed when in the slot & a different speed when
out of the slot.Also the gearing cover is different as the part which
normally covers the feed screw & shows the BF model is not there.I have not
had to disasemble the actual conversion,but it does screw into the feedscrew
at the gear.I hope this helps.----- Original Message -----
From: "Vinyl Visions" <[email protected]>
To: <[email protected]>
Sent: Tuesday, May 01, 2012 9:19 PM
Subject: Re: [Phono-L] COLUMBIA QUESTION...
John,Do you know anything about the 2/4 min conversions? Are they just the
gearing on the end of the original feedscrew or do they require a
feedscrew conversion also? If the 2/4 doesn't need a special feedscrew,
then maybe just the gears and selector would interchange, irregardless of
the feedscrew length...
From: [email protected]
To: [email protected]
Date: Tue, 1 May 2012 19:27:05 -0400
Subject: Re: [Phono-L] COLUMBIA QUESTION...
Hi,I have both a BE & a BF.The BF feedscrew & tube is 10 3/8" long & the
BE
is about 8 1/4" long.Not interchangable.John
----- Original Message -----
From: "Vinyl Visions" <[email protected]>
To: <[email protected]>
Sent: Tuesday, May 01, 2012 6:46 PM
Subject: [Phono-L] COLUMBIA QUESTION...
>
> Are parts - specifically feedscrews, gears and 2/4 adapters
> interchangeable between Columbia BE's and BF's? I'm sure someone out
> there
> knows...
> _______________________________________________
> Phono-L mailing list
> http://phono-l.org
>
_______________________________________________
Phono-L mailing list
http://phono-l.org
_______________________________________________
Phono-L mailing list
http://phono-l.org
_______________________________________________
Phono-L mailing list
http://phono-l.org
