There is an empty Triumph case at the Maumee Antique Mall, on the south side of Toledo, in case anyone needs it - it's a dealer at the end of aisle 6.
> From: [email protected] > To: [email protected]; [email protected] > Date: Mon, 7 May 2012 16:37:46 -0400 > Subject: [Phono-L] Triumph D with repeater parts > > > > > > Hello, I have a Triumph D that came with a repeater, the repeater is missing. > It has the extra gearing on the pulley and the screws to hold the repeater > to the upper bed plate. UPS dropped it and broke the lower bed plate. I got > another bed plate for it, the striping is poor. The pot metal bearing is > removed. The large carriage was broken in two. One spring in the motor is > cracked in pieces, I removed it. The mandrel will likely have to be replaced. > The feed screw might work, I do not know. UPS messed it up, but it is not > deep. The adjusting screw that holds the front of the motor in place that > you adjust pulley belt tension is bent. The motor looks good, the small > brass gears are worn. It has no case, but came with a home made bottom > case. The mandrel inner rod should be good. I would like to get $300 for > the parts including shipping. Croaking frog was selling just the repeater > pulley with the extra gear for $125, a motor frame alone for $60, speed > control sc re > w for $50, governor switch for $45, and I have seen spring barrels sell for > around $100 and a whole motor go for $225. The spring barrel assembly, the > motor, the upper and lower bed plate will be shipped in on box in separate > pieces so nothing gets broken. Steve > _______________________________________________ > Phono-L mailing list > http://phono-l.org _______________________________________________ Phono-L mailing list http://phono-l.org
