Re: AW: [pinhole-discussion] loading paper into a cancameraThat's what I
thought until one day, having travelled a distance to take photos, instead
of images I found only dark round spots caused by the light hitting the
backside of the paper that had shifted enough to cover the hole.......
-----Ursprüngliche Nachricht-----
Von: pinhole-discussion-admin@p at ???????
[mailto:pinhole-discussion-admin@p at ???????]Im Auftrag von R Duarte
Gesendet: Samstag, 22. Dezember 2001 08:16
An: pinhole-discussion@p at ???????
Betreff: Re: AW: [pinhole-discussion] loading paper into a cancamera
wow, i just put it in the can and close the lid. :) it always seems to
keep itself in place because of the curved wall.
From: "Markus Birsfelder" <[email protected]>
Reply-To: pinhole-discussion@p at ???????
Date: Sat, 22 Dec 2001 07:57:12 +0100
To: <pinhole-discussion@p at ???????>
Subject: AW: [pinhole-discussion] loading paper into a cancamera
Hi Lukasz
To hold the paper in place, I glue two pieces of thick cardboard of
about 2 cm2 to the inside of the can. I place one near the bottom and one
near the top, both in line with the pinhole. The paper I use is cut to the
length of the inner circumference of the can less 3-5 mm. This keeps it
safely in place.
In some cases, instead of cardboard, I used those self adhesive felt
squares that you can buy to stick to the ends of the legs of your chairs to
prevent scratching the floor.
In a more elaborate version, I drill four holes and weld nails that I
have cut to approx. 3mm length into the holes. This technique was necessary
when I prepared fairly small cans (5 cm diameter).
Markus
-----Ursprüngliche Nachricht-----
Von: pinhole-discussion-admin@p at ???????
[mailto:pinhole-discussion-admin@p at ???????]Im Auftrag von ?ukasz
Kacperczyk
Gesendet: Samstag, 22. Dezember 2001 05:27
An: pinhole
Betreff: [pinhole-discussion] loading paper into a cancamera
Hi there,
I'm new here, so my question is quite basic, namely: how do you load
(I mean position) paper into a can camera? Do you use a tape that has both
sides adhesive, or a normal one-sided tape? How do you make the paper stick
to the camera's wall?
Thanks in advance,
Best regards,
?ukasz
--------------------------------------------------------------------------
Tego nie znajdziesz w zadnym sklepie!
[ http://oferty.onet.pl ]
--------------------------------------------------------------------------
