Paul,
Sorry to bug you again but I have a couple questions:
1- Installation fails if AI doesn't find a Solaris partition. If that is the
case, then what if we have a new server or an old one that never had Solaris
installed in it before?
2- I tried to install sparc on LUN on a storage array but it failed - see
attached file
Note: The HBA bios is enabled and it and emlx - I am trying to install on LUN 0
{0} ok probe-scsi-all
/p...@7c0/p...@0/p...@9/e...@0,1
Device PortID 610300 WWPN 201400a0b829b1fe
LUN 0 Disk ENGENIO INF-01-00 0750
LUN 7 Disk ENGENIO Universal Xport 0750
Device PortID 610d00 WWPN 201500a0b829b1fe
LUN 0 Disk ENGENIO INF-01-00 0750
LUN 7 Disk ENGENIO Universal Xport 0750
/p...@7c0/p...@0/p...@9/e...@0
Cannot Init Link.
/p...@7c0/p...@0/p...@8/e...@0
Device PortID 610300 WWPN 201400a0b829b1fe
LUN 0 Disk ENGENIO INF-01-00 0750
LUN 7 Disk ENGENIO Universal Xport 0750
Device PortID 610d00 WWPN 201500a0b829b1fe
LUN 0 Disk ENGENIO INF-01-00 0750
LUN 7 Disk ENGENIO Universal Xport 0750
/p...@7c0/p...@0/p...@1/p...@0,2/LSILogic,s...@2
MPT Version 1.05, Firmware Version 1.06.00.00
Any advice?
Thanks
Abdel Jalal
-----Original Message-----
From: Jalal, Abdel
Sent: Thursday, July 23, 2009 2:07 PM
To: 'Bart Smaalders'
Cc: [email protected]; Alan Steinberg; [email protected]; Le, Janey
Subject: RE: [pkg-discuss] SUNWcs missing from repo?
Bart,
I have attached two installation logs. The first one, install_log_1.txt, is the
one that took too long because I had the FC cables attached to the client and
to a switch (none of the ports belong to an active zone). The packages that are
added to the default pkgs are SUNWiscsitgt and SUNWiscsi. The second one,
install_log_2.txt, is when I unplugged the cables, it took about 53 min to
finish pkg installation and with an extra package SUNWscp added to the previous
ones. The repo I am using is the default one pkg.opensolaris.org/release -- no
mirroring has been setup yet -- I know that the AI will scan all the devices
and chooses the first one that meets the requirements but I did not have any
other devices mapped to the client other than the internal ones. The question
is why it took too long ( around 3 hrs to finish pkg installation) whereas the
second one took only 53 min?
Thanks
Abdel Jalal
-----Original Message-----
From: Bart Smaalders [mailto:[email protected]]
Sent: Wednesday, July 22, 2009 5:52 PM
To: Jalal, Abdel
Cc: [email protected]; Alan Steinberg; [email protected]; Le, Janey
Subject: Re: [pkg-discuss] SUNWcs missing from repo?
Jalal, Abdel wrote:
> It works now but it took very long to finish the installation. I wonder if
> it's a network problem or client issue
Well, to make it easier of us to guess you might describe:
1) how long is very long?
2) how many packages you are installing?
3) where your client is wrt where the repo is?
- Bart
--
Bart Smaalders Solaris Kernel Performance
[email protected] http://blogs.sun.com/barts
"You will contribute more with mercurial than with thunderbird."
<AI Jul 23 21:55:51> Auto reboot disabled
<TDDM_I Jul 23 21:55:51> -> ddm_get_disks()
<TDDM_I Jul 23 21:55:51> Controller name: pci10b9,5229
<TDDM_I Jul 23 21:55:51> Controller type: 1
<TDDM_I Jul 23 21:55:51> Drive name: sd
<TDDM_I Jul 23 21:55:51> ddm_drive_is_cdrom(): Removable: Yes
<TDDM_I Jul 23 21:55:51> ddm_drive_is_cdrom(): CD:Yes
<TDDM_I Jul 23 21:55:51> Controller name: fp
<TDDM_I Jul 23 21:55:51> Controller type: 13
<TDDM_I Jul 23 21:55:51> Drive name: ssd
<TDDM_I Jul 23 21:55:51> ddm_drive_is_cdrom(): Removable: No
<TDDM_I Jul 23 21:55:51> ddm_drive_is_cdrom(): CD:No
<TDDM_I Jul 23 21:55:51> Controller name: fp
<TDDM_I Jul 23 21:55:51> Controller type: 13
<TDDM_I Jul 23 21:55:51> Drive name: ssd
<TDDM_I Jul 23 21:55:51> ddm_drive_is_cdrom(): Removable: No
<TDDM_I Jul 23 21:55:51> ddm_drive_is_cdrom(): CD:No
<TDDM_I Jul 23 21:55:51> ddm_drive_get_name(): Can't get alias name, err=9
<TDMG_I Jul 23 21:55:51> got disks nfound=2
<TDMG_I Jul 23 21:55:51> disks 0 nfound=2
<TDMG_I Jul 23 21:55:51> disks 1 nfound=2
<TDDM_W Jul 23 21:55:51> ddm_get_disk_attributes():Can't get current bootdisk
<TDDM_I Jul 23 21:55:51> ddm_conv_attr_list(): start not in table
<TDDM_I Jul 23 21:55:51> ddm_conv_attr_list(): naccessible not in table
<TDDM_I Jul 23 21:55:51> ddm_conv_attr_list(): ncylinders not in table
<TDDM_I Jul 23 21:55:51> ddm_conv_attr_list(): nphys_cylinders not in table
<TDDM_I Jul 23 21:55:51> ddm_conv_attr_list(): nalt_cylinders not in table
<TDDM_I Jul 23 21:55:51> ddm_conv_attr_list(): nactual_cylinders not in table
<TDDM_W Jul 23 21:55:51> ddm_get_disk_attributes():Can't get current bootdisk
<OM Jul 23 21:55:52> Ignoring c8t201400A0B829B1FEd0 because of bad Geometry
<TDMG_I Jul 23 21:55:52> >>> discover partition by
diskname=c8t201400A0B829B1FEd7
<TDMG_I Jul 23 21:55:53> got slices
<TDMG_I Jul 23 21:55:53> got disks nfound=2 <AI Jul 23 21:55:51>
/tmp/ai_combined_manifest.xml is a valid manifest
<TDMG_I Jul 23 21:55:53> >>> object count=2
<TDMG_I Jul 23 21:55:53> >>> obj 0 handle=0x2c7c8
<TDDM_I Jul 23 21:55:53> ddm_get_slice_attributes(): Can't get last mntpt for
/dev/dsk/c8t201400A0B829B1FEd7s6
<TDMG_I Jul 23 21:55:53> obj=c8t201400A0B829B1FEd7s6 search
disk=c8t201400A0B829B1FEd7
<TDMG_I Jul 23 21:55:53> >>> partition/slice 0 c8t201400A0B829B1FEd7s6
NDISKS=2
<TDMG_I Jul 23 21:55:53> >>> partition/slice match
0 c8t201400A0B829B1FEd7 c8t201400A0B829B1FEd7s6
<TDMG_I Jul 23 21:55:53> >>> obj 1 handle=0x2c7a0
<TDDM_I Jul 23 21:55:53> ddm_get_slice_attributes(): Can't get last mntpt for
/dev/dsk/c8t201400A0B829B1FEd7s2
<TDMG_I Jul 23 21:55:53> obj=c8t201400A0B829B1FEd7s2 search
disk=c8t201400A0B829B1FEd7
<TDMG_I Jul 23 21:55:53> >>> partition/slice 1 c8t201400A0B829B1FEd7s2
NDISKS=2
<TDMG_I Jul 23 21:55:53> >>> partition/slice match
1 c8t201400A0B829B1FEd7 c8t201400A0B829B1FEd7s2
<TDMG_I Jul 23 21:55:53> Opening /etc/mnttab...
<TDDM_I Jul 23 21:55:53> ddm_get_slice_attributes(): Can't get last mntpt for
/dev/dsk/c8t201400A0B829B1FEd7s6
<TDDM_I Jul 23 21:55:54> ddm_get_slice_attributes(): Can't get last mntpt for
/dev/dsk/c8t201400A0B829B1FEd7s2
<TDMG_I Jul 23 21:55:54> executing /usr/sbin/zpool import
<TDMG_I Jul 23 21:56:39> finishing td_be_list
<TDMG_I Jul 23 21:56:39> td_discovery_release
<TDDM_I Jul 23 21:56:39> -> ddm_free_handle_list()
<TDDM_I Jul 23 21:56:39> -> ddm_free_handle_list()
<TDMG_I Jul 23 21:56:39> td_discovery_release ends
<AI_I Jul 23 21:56:41> Number of disks = 2
<OM_I Jul 23 21:56:41> Size of physical memory: 4088 MiB
<OM Jul 23 21:56:41> System reports enough physical memory for installation,
swap is optional
<AI Jul 23 21:56:41> Checking any disks for minimum recommended size of 12646
MB<AI Jul 23 21:56:41> Disk c8t201400A0B829B1FEd7 size
listed as 20 MB
<AI_I Jul 23 21:56:41> No default disk was selected
<AI Jul 23 21:56:41> Cannot find a disk using default search. Specify a disk
name or other search criteria in the manifest.
<AI Jul 23 21:56:41> Target validation failed
<AI Jul 23 21:56:41> ai target device not found
<AI Jul 23 21:56:41> Auto install failed
_______________________________________________
pkg-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/pkg-discuss
