Hello Alan,
Thank you for your kindness. I ran your suggested commands and that results as
below:
hiro$ PKG_CONFIG_PATH="/Users/hiro/Desktop/plplot_ifort/lib/pkgconfig"
pkg-config --cflags plplotd-f95
-I/Users/hiro/Desktop/plplot_ifort/include/plplot
-I/Users/hiro/Desktop/plplot_ifort/lib/fortran/modules/plplot
-I/Users/hiro/Desktop/plplot_ifort/include/plplot
hiro$ make x00f
/usr/bin/ifort x00f.f90 -o x00f
`PKG_CONFIG_PATH="/Users/hiro/Desktop/plplot_ifort/lib/pkgconfig" pkg-config
--cflags --libs plplotd-f95` -lplf95demolibd
x00f.f90(24): error #7002: Error in opening the compiled module file. Check
INCLUDE paths. [PLPLOT_STR]
use plf95demolib
--------^
compilation aborted for x00f.f90 (code 1)
make: *** [x00f] Error 1
Also I intend a file list in specified fold with pkg-config as below:
hiro$ ls -l /Users/hiro/Desktop/plplot_ifort/include/plplot
total 560
-rw-r--r-- 1 hiro staff 3255 Mar 30 17:49 disptab.h
-rw-r--r-- 1 hiro staff 7284 Mar 30 17:49 drivers.h
-rw-r--r-- 1 hiro staff 5398 Mar 30 17:49 gcw.h
-rw-r--r-- 1 hiro staff 4043 Mar 30 17:49 pdf.h
-rw-r--r-- 1 hiro staff 3304 Mar 30 17:51 plConfig.h
-rw-r--r-- 1 hiro staff 2802 Mar 30 17:51 plDevs.h
-rw-r--r-- 1 hiro staff 2763 Mar 30 17:49 pldebug.h
-rw-r--r-- 1 hiro staff 5761 Mar 30 17:51 pldll.h
-rw-r--r-- 1 hiro staff 7509 Mar 30 17:49 plevent.h
-rw-r--r-- 1 hiro staff 77370 Mar 30 17:49 plplot.h
-rw-r--r-- 1 hiro staff 32642 Mar 30 17:49 plplotP.h
-rw-r--r-- 1 hiro staff 28357 Mar 30 17:49 plplotcanvas.h
-rw-r--r-- 1 hiro staff 42350 Mar 30 17:49 plstream.h
-rw-r--r-- 1 hiro staff 30762 Mar 30 17:49 plstrm.h
-rw-r--r-- 1 hiro staff 4466 Mar 30 17:49 plxwd.h
-rw-r--r-- 1 hiro staff 2633 Mar 30 17:49 qsastime.h
-rw-r--r-- 1 hiro staff 1612 Mar 30 17:49 qsastimedll.h
hiro$ ls -l /Users/hiro/Desktop/plplot_ifort/lib/fortran/modules/plplot
total 392
-rw-r--r-- 1 hiro staff 2447 Mar 30 17:51 plf95demolib.mod
-rw-r--r-- 1 hiro staff 125957 Mar 30 17:51 plplot.mod
-rw-r--r-- 1 hiro staff 629 Mar 30 17:51 plplot_flt.mod
-rw-r--r-- 1 hiro staff 62576 Mar 30 17:51 plplotp.mod
Those results seem to be working fine except error #7002. Since error #7002 is
an intrinsic error message, the built result of *.mod with ifort is suspected.
If there are some ifort compiling options to obtain a normal built result, an
built result of *.mod with ifort will be equaled to an built results with
gfortran. Are there some compiling option for option?
Sincerely,
Hiro
> On Mar 30, 2015, at 01:57, Alan W. Irwin <[email protected]> wrote:
>
> On 2015-03-29 14:26+0900 Hiroyasu Yasuda wrote:
>
>> Hello Alan,
>>
>> Thank you for the reply.
>>
>>> If all appears to be well with that option, then please send the
>>> Makefile located at $PREFIX/plplot5.10.0/examples/f95/Makefile
>>> as well as the results from
>>>
>>> make x00f >& x00f.out
>>>
>>> in that directory.
>>
>> At my last mail, according to your mail as above I attached an output of
>> result when I ran Make in $PREFIX/plplot5.10.0/examples/f95/ as “make x00f
>> >& x00f.out”. If your intention misunderstood me, please let me know your
>> request as specific commands again.
>
> Hi Hiro:
>
> I was referring to a different part of that e-mail which I replicate
> here for your convenience:
>
> ===========
> If you look carefully at the Makefile, the command it uses to find the
> necessary compile flags to build one of the f95 examples is
>
> PKG_CONFIG_PATH=$PREFIX/lib/pkg-config pkgconfig --cflags plplot-f95
>
> When I run that command here with appropriate $PREFIX, here are the
> results:
>
> -I<PREFIX>/include/plplot -I<PREFIX>/lib/fortran/modules/plplot
>
> where the <PREFIX> result should be the same as $PREFIX.
>
> What are the results of that command there?
> ===========
>
> It's that last question I need answered.
>
> Alan
> __________________________
> Alan W. Irwin
>
> Astronomical research affiliation with Department of Physics and Astronomy,
> University of Victoria (astrowww.phys.uvic.ca).
>
> Programming affiliations with the FreeEOS equation-of-state
> implementation for stellar interiors (freeeos.sf.net); the Time
> Ephemerides project (timeephem.sf.net); PLplot scientific plotting
> software package (plplot.sf.net); the libLASi project
> (unifont.org/lasi); the Loads of Linux Links project (loll.sf.net);
> and the Linux Brochure Project (lbproject.sf.net).
> __________________________
>
> Linux-powered Science
> __________________________
- - - - -
安田 浩保
〒950-2181 新潟市西区五十嵐二の町8050
新潟大学 災害・復興科学研究所
総合研究棟（環境エネルギ系）213号室
TEL : 025-262-7053 FAX : 025-262-7050
E-mail : [email protected]
Hiroyasu YASUDA
Laboratory of River Research
Research Institute for Natural Hazards & Disaster Recovery
Niigata University
Ikarashi 2-no-cho, Nis-ku, Niigata, 950-2181, Japan
Phone +81-25-262-7053 Facsimile +81-25-262-7050
E-mail [email protected]
URL http://rde.nhdr.niigata-u.ac.jp/lab/
.´￣`.
: (` :
`. `´ :
`・--´
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
Plplot-general mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/plplot-general
