On 2015-03-30 22:38+0900 Hiroyasu Yasuda wrote: > Hello Alan, > > Thank you for your kindness. I ran your suggested commands and that results > as below: > > hiro$ PKG_CONFIG_PATH="/Users/hiro/Desktop/plplot_ifort/lib/pkgconfig" > pkg-config --cflags plplotd-f95 > -I/Users/hiro/Desktop/plplot_ifort/include/plplot > -I/Users/hiro/Desktop/plplot_ifort/lib/fortran/modules/plplot > -I/Users/hiro/Desktop/plplot_ifort/include/plplot > > hiro$ make x00f > /usr/bin/ifort x00f.f90 -o x00f > `PKG_CONFIG_PATH="/Users/hiro/Desktop/plplot_ifort/lib/pkgconfig" pkg-config > --cflags --libs plplotd-f95` -lplf95demolibd > x00f.f90(24): error #7002: Error in opening the compiled module file. Check > INCLUDE paths. [PLPLOT_STR] > use plf95demolib > --------^ > compilation aborted for x00f.f90 (code 1) > make: *** [x00f] Error 1 > > Also I intend a file list in specified fold with pkg-config as below: > > hiro$ ls -l /Users/hiro/Desktop/plplot_ifort/include/plplot > total 560 > -rw-r--r-- 1 hiro staff 3255 Mar 30 17:49 disptab.h > -rw-r--r-- 1 hiro staff 7284 Mar 30 17:49 drivers.h > -rw-r--r-- 1 hiro staff 5398 Mar 30 17:49 gcw.h > -rw-r--r-- 1 hiro staff 4043 Mar 30 17:49 pdf.h > -rw-r--r-- 1 hiro staff 3304 Mar 30 17:51 plConfig.h > -rw-r--r-- 1 hiro staff 2802 Mar 30 17:51 plDevs.h > -rw-r--r-- 1 hiro staff 2763 Mar 30 17:49 pldebug.h > -rw-r--r-- 1 hiro staff 5761 Mar 30 17:51 pldll.h > -rw-r--r-- 1 hiro staff 7509 Mar 30 17:49 plevent.h > -rw-r--r-- 1 hiro staff 77370 Mar 30 17:49 plplot.h > -rw-r--r-- 1 hiro staff 32642 Mar 30 17:49 plplotP.h > -rw-r--r-- 1 hiro staff 28357 Mar 30 17:49 plplotcanvas.h > -rw-r--r-- 1 hiro staff 42350 Mar 30 17:49 plstream.h > -rw-r--r-- 1 hiro staff 30762 Mar 30 17:49 plstrm.h > -rw-r--r-- 1 hiro staff 4466 Mar 30 17:49 plxwd.h > -rw-r--r-- 1 hiro staff 2633 Mar 30 17:49 qsastime.h > -rw-r--r-- 1 hiro staff 1612 Mar 30 17:49 qsastimedll.h > > hiro$ ls -l /Users/hiro/Desktop/plplot_ifort/lib/fortran/modules/plplot > total 392 > -rw-r--r-- 1 hiro staff 2447 Mar 30 17:51 plf95demolib.mod > -rw-r--r-- 1 hiro staff 125957 Mar 30 17:51 plplot.mod > -rw-r--r-- 1 hiro staff 629 Mar 30 17:51 plplot_flt.mod > -rw-r--r-- 1 hiro staff 62576 Mar 30 17:51 plplotp.mod >
> Those results seem to be working fine except error #7002. Since error #7002 is an intrinsic error message, the built result of *.mod with ifort is suspected. If there are some ifort compiling options to obtain a normal built result, an built result of *.mod with ifort will be equaled to an built results with gfortran. Are there some compiling option for option? I could be wrong, but my interpretation of the error message is ifort cannot find the fortran modules (specifically the plf95demolib module file) despite the -I option pointing right to them. That is an extremely puzzling result. That is also similar to a result another user got with ifort back in 2011, see <https://sourceforge.net/p/plplot/bugs/107/>. According to <http://inside.mines.edu/mio/man/ifort.html> the -I option should be recognized by ifort to help that compiler find the modules, but since that appears not to be working for your platform I wonder if you have a different version of ifort that does not recognize this option? What does your own ifort manual say about the option that should be used to find modules? Also, I suggest you experiment with the build command to see what you have to modify to get it to work. Currently, according to your result above, the Makefile generates the following command. /usr/bin/ifort x00f.f90 -o x00f \ `PKG_CONFIG_PATH="/Users/hiro/Desktop/plplot_ifort/lib/pkgconfig" \ pkg-config --cflags --libs plplotd-f95` -lplf95demolibd I would run that by hand (outside the Makefile) to confirm you get the same error, then cut and paste the result of PKG_CONFIG_PATH="/Users/hiro/Desktop/plplot_ifort/lib/pkgconfig" \ pkg-config --cflags --libs plplotd-f95 to remove pkg-config from the result. Then modify the relevant -I option according to what your ifort documentation says to do to see if you can convince ifort to find your installed modules directory at /Users/hiro/Desktop/plplot_ifort/lib/fortran/modules/plplot. Sorry I cannot be of more explicit help, but this is a tough issue that I think can only be figured out by experimentation on your part. Alan __________________________ Alan W. Irwin Astronomical research affiliation with Department of Physics and Astronomy, University of Victoria (astrowww.phys.uvic.ca). Programming affiliations with the FreeEOS equation-of-state implementation for stellar interiors (freeeos.sf.net); the Time Ephemerides project (timeephem.sf.net); PLplot scientific plotting software package (plplot.sf.net); the libLASi project (unifont.org/lasi); the Loads of Linux Links project (loll.sf.net); and the Linux Brochure Project (lbproject.sf.net). __________________________ Linux-powered Science __________________________ ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Plplot-general mailing list Plplot-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/plplot-general
