Who knows... check the fans first... that's the cheapest and easiest to
fix, if you have one that isn't spinning.
Power supply would most likely be the next cheapest... that being said,
spend a little extra money for a good power supply, with the cheapest
ones, you don't usually get your monies worth and it might actually
crash more than it is now.
Brian
On 7/13/20 9:09 PM, Michael via PLUG-discuss wrote:
Thanks for the tip! I'd love to come get it but the distance makes it
prohibitive. I live in Florida But you think replacing the power
supply unit will do it?
On Tue, Jul 14, 2020 at 12:00 AM Donald Mac McCarthy <[email protected]> wrote:
Some boards have 2 fans for CPU - especially boards designed for
overclocking. The face that you don't have any voltage/RPMs across the
fan3 may not be a problem.
The only way you are going to be sure to tell it is a power supply is
generally to replace it. You could replace CPU, memory, or board one at
a time, but those are generally more expensive than a PSU.
I have had many times that the PSU was the issue when running a compute
cluster years ago. In one case the PSW was not getting enough airflow
due to the positional design of the chassis vs the fan location of a
replacement CPU which had undergone a spec change, and therefore wouls
reach thermal protection shutdown. In another, a thermal expansion in a
PSU component when under load would cause a short, and the system would
shutoff. In another case - dirty output due to a power limiting
component that was failing cause all kinds of problems, eventually
causing us to have to replace RAM, CPU, MB, and a RAID card because of
"brown out" type situations. We were only to know what happened after
the manufacturer did some testing on the RMAed PSU. When you have 850
servers all built assembled from components (academic environment where
the Professor got more systems for his grant money by buying components
and using undergrad/graduate research assistants to assemble them), some
interesting things happen, may of them were power supply related.
Good luck, but I think you may save more in time and effort to just
replace it. I have a 400W ATX powersupply you can have if you want to
come get it. I am not sure how much wattage you need, but if 400 will
cut it - that one can be yours for the low low price of gas money.
Mac
Michael via PLUG-discuss wrote on 7/13/20 8:41 PM:
inxi tells me this about my fans:
Fan Speeds (RPM): cpu: 0 fan-1: 3139 fan-3: 0
So my cpu fan isn't working. I thought my computer would CRASH/FREEZE
more often if the cpu fan wasn't working. What is: fan-1: 3139 fan-3:
0
I'm not sure but I think my power supply fan is running slow. Is that a thing?
On Mon, Jul 13, 2020 at 11:26 PM Michael <[email protected]> wrote:
hey.... I forgot to tell ya all that last night after I put the
system under stress I got it to freeze.
On Mon, Jul 13, 2020 at 9:29 PM Michael <[email protected]> wrote:
when I'm just running memory test the temp is 46
On Mon, Jul 13, 2020 at 8:06 PM Michael <[email protected]> wrote:
that was it under stress.
On Mon, Jul 13, 2020 at 4:55 PM Brian Cluff via PLUG-discuss
<[email protected]> wrote:
If that's your idle temperature, that is terrible. I'll bet if you run
stress while monitoring your temperature you'll see it shoot up even
higher than that.
(I cook chicken sous vide at 60C)
Brian Cluff
On 7/13/20 10:05 AM, Michael via PLUG-discuss wrote:
Do 80 is bad? Mine was at 89 when I first started it
---------------------------------------------------
PLUG-discuss mailing list - [email protected]
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
--
:-)~MIKE~(-:
--
:-)~MIKE~(-:
--
:-)~MIKE~(-:
--
Donald "Mac" McCarthy
Director, Field Operations
Open Source Context
+1.602.584.4445
[email protected]
https://oscontext.com
---------------------------------------------------
PLUG-discuss mailing list - [email protected]
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
