Looks like your drive probably isn't the problem.
Brian Cluff
On 7/16/20 11:54 AM, Michael via PLUG-discuss wrote:
On Thu, Jul 16, 2020 at 3:37 AM Brian Cluff via PLUG-discuss
<[email protected]> wrote:
Also check the health of your hard drive with smartctl. I've hard
systems freeze on me because my hard drive was dying that then appear to
work again for a while after a reboot. Basically your drive starts
throwing errors and eventually the system remounts it as read only and
your system eventually freaks out and freezes because it can't write to
the drive anymore.
I sure hope this is the problem. It'll give me an excuse to put an ssd
in the machine.
This is from live media boot. I'll see if I can freeze the system
again.... it did when I tried it before but it hasn't frozen for a
couple of days now.
sudo smartctl --all /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-26-generic] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue (SATA)
Device Model: WDC WD3200AAKS-75L9A0
Serial Number: WD-WMAV2S110171
LU WWN Device Id: 5 0014ee 057775228
Firmware Version: 02.03E02
User Capacity: 320,072,933,376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.5, 3.0 Gb/s
Local Time is: Thu Jul 16 18:33:20 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6000) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 73) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0027 138 133 021 Pre-fail
Always - 4075
4 Start_Stop_Count 0x0032 089 089 000 Old_age
Always - 11090
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age
Always - 0
9 Power_On_Hours 0x0032 019 019 000 Old_age
Always - 59593
10 Spin_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age
Always - 2282
192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age
Always - 1044
193 Load_Cycle_Count 0x0032 197 197 000 Old_age
Always - 11090
194 Temperature_Celsius 0x0022 105 080 000 Old_age
Always - 38
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age
Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age
Offline - 0
240 Head_Flying_Hours 0x0032 024 024 000 Old_age
Always - 55990
241 Total_LBAs_Written 0x0032 200 200 000 Old_age
Always - 78243499218
242 Total_LBAs_Read 0x0032 200 200 000 Old_age
Always - 174621575474
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 14352 -
# 2 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Well, I am running glmark2, watch, and stress-ng for about (one round
of glmark2) with no freeze. all from live media
--
:-)~MIKE~(-:
---------------------------------------------------
PLUG-discuss mailing list - [email protected]
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
---------------------------------------------------
PLUG-discuss mailing list - [email protected]
To subscribe, unsubscribe, or to change your mail settings:
https://lists.phxlinux.org/mailman/listinfo/plug-discuss
