failover similar to your requirements. anyway, here's a hint: if you're
not going to use Zebra, then your question would be off-topic :)
On 7/1/06, Learning Process <[EMAIL PROTECTED]> wrote:
Hi, a client of ours is requesting for failover/load balancing setup using Cisco 2800 as a router. Link will be provided by 2 different ISP. 2 x T1 lease line is being used.The following is the setup (Cisco NOT using NAT)
Router Serial 1 -> ISP 1 = 202.x.x.x/27
Router Serial 2 -> ISP 2 = 203.x.x.x/27
Router Fa0 -> LAN
If ISP1 goes down, ISP2 will take over automatically. Is this possible ? If so, how can I set this up. I have read about cisco 'Floating Static Route' but not quite sure if this can be used.
I have searched the forums/google but that didn't help me much.
PS. BGP/Zebra is not going to work for me.
Any help/hint/tip is much appreciated.
_________________________________________________ Philippine Linux Users' Group (PLUG) Mailing List [email protected] (#PLUG @ irc.free.net.ph) Read the Guidelines: http://linux.org.ph/lists Searchable Archives: http://archives.free.net.ph
