> Init3 = AT+CGDCONT=1,"IP","internet" "internet" entry will vary depending on telco settings? For globe i use "internet.globe.com.ph", username=globe, password=globe
I use gnome-ppp to manage the connection to have the cutsey gui icon to connect/disconnect. But the additional init strings you have to put in. The special dialin number *99# or *99***3# works for most devices. I've used several usb HSDPA dongles. Better google for your device's settings. On Fri, Jul 18, 2008 at 12:34 PM, AC Perdon <[EMAIL PROTECTED]> wrote: > Hi, > > Any idea why my ppp deamon saddenly died? below are the details. > > #dmesg | grep ttyACM > [ 129.132518] cdc_acm 4-1:1.10: ttyACM0: USB ACM device > [ 960.831645] cdc_acm 4-1:1.10: ttyACM0: USB ACM device > [ 1141.317419] cdc_acm 4-1:1.10: ttyACM0: USB ACM device > > #wvdial running > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. --> Im not sure why I get this > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Sending: AT+CGDCONT=1,"IP","internet" > AT+CGDCONT=1,"IP","internet" > OK > --> Modem initialized. > --> Idle Seconds = 3000, disabling automatic reconnect. > --> Sending: ATD*99# > --> Waiting for carrier. > ATD*99# > CONNECT > [EMAIL PROTECTED] } [EMAIL PROTECTED]"}&} }*} } g}%~ > --> Carrier detected. Starting PPP immediately. > --> Starting pppd at Fri Jul 18 12:13:56 2008 > --> Pid of pppd: 6499 > --> Using interface ppp0 > --> pppd: [18]�[06][08] > --> pppd: [18]�[06][08] > --> pppd: [18]�[06][08] > --> pppd: [18]�[06][08] > --> pppd: [18]�[06][08] > --> pppd: [18]�[06][08] > --> Disconnecting at Fri Jul 18 12:14:01 2008 > --> The PPP daemon has died: A modem hung up the phone (exit code = 16) > --> man pppd explains pppd error codes in more detail. > --> Try again and look into /var/log/messages and the wvdial and pppd man > pages for more information. > > > #/var/log/message > Jul 18 12:13:56 myturf pppd[6499]: pppd 2.4.4 started by root, uid 0 > Jul 18 12:13:57 myturf pppd[6499]: Using interface ppp0 > Jul 18 12:13:57 myturf pppd[6499]: Connect: ppp0 <--> /dev/ttyACM0 > Jul 18 12:13:57 myturf pppd[6499]: PAP authentication succeeded > Jul 18 12:13:57 myturf kernel: [ 184.053428] PPP BSD Compression module > registered > Jul 18 12:13:57 myturf kernel: [ 184.117052] PPP Deflate Compression > module registered > Jul 18 12:13:57 myturf pppd[6499]: LCP terminated by peer > Jul 18 12:14:00 myturf pppd[6499]: Connection terminated. > Jul 18 12:14:00 myturf pppd[6499]: Modem hangup > Jul 18 12:14:00 myturf pppd[6499]: Exit. > > OS: ubuntu 8.04.1 (2.6.24-19-generic) > wvdial: 1.60.1 > > My laptop is dual boot for win its works. > > Thanks, > AC > > > On Fri, Jul 18, 2008 at 9:58 AM, Paolo Falcone <[EMAIL PROTECTED]> > wrote: > >> Now if only someone would package that (like what Apple did on Mac OSX), >> and integrate it with Network Manager that would be even better! >> >> >> On Fri, Jul 18, 2008 at 9:49 AM, Mhac Janapin <[EMAIL PROTECTED]> >> wrote: >> >>> Cool! >>> >>> On Fri, Jul 18, 2008 at 9:16 AM, Pablo Manalastas < >>> [EMAIL PROTECTED]> wrote: >>> >>>> In my Yahoo blog, I reposted Gideon Guillen's article on connecting >>>> your Linux laptop to the Internet, using a 3G phone. I have added other >>>> important details, in an attempt to make the connection process as painless >>>> as possible. Here is the link to my post, which I have also included below: >>>> >>>> http://blog.360.yahoo.com/prmanalastas?cq=1&p=267 >>>> >>>> *** Actual Blog Post Follows *** >>>> >>>> Using 3G Phone to Connect Linux Laptop to Internet (Jul 18 08) >>>> >>>> Gideon Guillen wrote in his blog a procedure for using a Motorola V6 >>>> mobile phone as a modem to connect your Linux laptop to the Internet. >>>> >>>> >>>> http://elijah.pinoguin.com/blog/blog-view/article/motorola-v6-as-modem-in-ubuntu-linux.html >>>> >>>> His procedure actually works for the Nokia 6680 3G phone (and possibly >>>> other 3G phones as well) when used as a modem for your Fedora-9 or Debian >>>> Testing (Lenny) to connect to the Internet using a Smart Buddy prepaid SIM. >>>> >>>> Let me recap the important steps to do: >>>> >>>> 1. On your Nokia 6680 phone, get the correct Internet settings by >>>> sending the following text message to 211: >>>> >>>> SET N6680 >>>> >>>> Smart replies by giving you the correct settings for SmartGPRS, >>>> SmartInternet, and SmartMMS. Save all of these settings as the default >>>> settings for your phone. If prompted for pasword, type 1234, unless you >>>> changed the default password on your phone. If you have a different phone, >>>> you can get the correct message to send to 211 by sending the following >>>> text >>>> message to 211 instead: >>>> >>>> SET LIST >>>> >>>> After installing the correct settings for GPRS, Internet and MMS, your >>>> phone is ready for stand-alone use for connecting to the Internet using >>>> your >>>> phone's little Web browser. However, you would like to use your laptop with >>>> your phone, since your laptop has a better keyboard and mouse and a bigger, >>>> more comfortable screen. You need the data cable DKU-2 to connect your >>>> N6680 >>>> phone to the USB port of your laptop. The DKU-2 cable is part of the Nokia >>>> 6680 package, but if your package does not include the data cable, you can >>>> always get one from CDR-King or from any cellphone store. A different 3G >>>> phone will use a different data cable. >>>> >>>> 2. On your Linux laptop, install wvdial and ppp, if you do not already >>>> have them. In Fedora, these were installed by default, but in Debian, I had >>>> to get them using apt-get: >>>> >>>> apt-get install wvdial >>>> >>>> After installing wvdial, as root, create or modify the file >>>> /etc/wvdial.conf so that it contains the following: >>>> >>>> [Dialer Defaults] >>>> Init1 = ATZ >>>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>> Init3 = AT+CGDCONT=1,"IP","internet" >>>> Modem Type = USB Modem >>>> ISDN = 0 >>>> Phone = *99# >>>> New PPPD = yes >>>> Modem = /dev/ttyACM0 >>>> Username = yourusername >>>> Password = yourpassword >>>> Baud = 460800 >>>> Idle Seconds = 3000 >>>> Auto DNS = 1 >>>> Stupid Mode = 1 >>>> Compuserve = 0 >>>> Baud = 460800 >>>> Dial Command = ATD >>>> Ask Password = 0 >>>> FlowControl = NOFLOW >>>> >>>> 3. As root user, install your user account in the file /etc/sudoers. For >>>> example, if you are user "ambo", you need to add the line >>>> >>>> ambo ALL=(ALL) ALL >>>> >>>> to the /etc/sudoers file. >>>> >>>> 4. Before dialing, connect your phone to your laptop using the USB data >>>> cable, and check that the phone has already been detected by the system. >>>> Type the command >>>> >>>> dmesg | grep ttyACM >>>> >>>> and if you see a line containing /dev/ttyACM0, that means your phone is >>>> already detected by the system and you can now dial. As a normal user (in >>>> my >>>> case, I am user "ambo"), dial Smart by typing the following command in a >>>> terminal window: >>>> >>>> sudo wvdial >>>> >>>> This command dials the Smart Internet number, manages a ppp connection, >>>> performs "ifconfig" to assign an IP address to your laptop, does a "route >>>> add" command to fix the routing table, and installs the DNS IP numbers >>>> provided by Smart in /etc/resolv.conf. Do not exit from this terminal >>>> window >>>> -- typing a control-C in this window will disconnect you from the Internet. >>>> >>>> As a normal user, check if you have a successful connection by giving >>>> the command: >>>> >>>> dig www.google.com >>>> >>>> If the system gives you the IP address of Google, then you are now >>>> connected to the Internet. Smart will charge you ten pesos for every 30 >>>> minutes of Internet use. >>>> >>>> Some notes: >>>> >>>> This procedure works without fail in my Debian Testing/Lenny laptop. >>>> Since Ubuntu is a Debian derivative, it should also work for Ubuntu. >>>> However, on my Fedora laptop, I needed to manually copy the DNS values >>>> given >>>> by the ppp connection into the file /etc/resolv.conf. I had to type the >>>> entries >>>> >>>> nameserver 203.84.191.216 >>>> nameserver 121.1.3.250 >>>> >>>> in /etc/resolv.conf. I think the Fedora ppp package or the Fedora >>>> NetworkManager package does not automatically take care of this. >>>> >>>> Thank you Gideon Guillen for providing us with this useful procedure. >>>> >>>> >>>> _________________________________________________ >>>> Philippine Linux Users' Group (PLUG) Mailing List >>>> http://lists.linux.org.ph/mailman/listinfo/plug >>>> Searchable Archives: http://archives.free.net.ph >>>> >>> >>> >>> >>> -- >>> Mhac Janapin >>> PBTS System Administrator >>> Baguio City, Philippines >>> ============= >>> http://mulingsilang.wordpress.com >>> ============= >>> I'm an Open Source Enthusiast. c",) >>> >>> _________________________________________________ >>> Philippine Linux Users' Group (PLUG) Mailing List >>> http://lists.linux.org.ph/mailman/listinfo/plug >>> Searchable Archives: http://archives.free.net.ph >>> >> >> >> _________________________________________________ >> Philippine Linux Users' Group (PLUG) Mailing List >> http://lists.linux.org.ph/mailman/listinfo/plug >> Searchable Archives: http://archives.free.net.ph >> > > > > -- > AC Perdon > Registered GNU/Linux User #340122 > > _________________________________________________ > Philippine Linux Users' Group (PLUG) Mailing List > http://lists.linux.org.ph/mailman/listinfo/plug > Searchable Archives: http://archives.free.net.ph > -- Marie Charisse L. Gascon http://www.chasys.net
_________________________________________________ Philippine Linux Users' Group (PLUG) Mailing List http://lists.linux.org.ph/mailman/listinfo/plug Searchable Archives: http://archives.free.net.ph
