Thanks I'll add them to the list,
again thanks -pete >>>>>> "Pete" == Pete Lancashire <[email protected]> writes: > > Pete> I'm going to upgrade an old HP instruments this winter and am > Pete> looking for recommendations on a SBC that will run Linux. > > Pete> For those that are curious, the instrument is a HP 8401C Network > Pete> analyzer. This instrument predated even GPIB and initially did > Pete> not have any computer interfaces. Even when it did, it took a > Pete> lot of external hardware. The other instruments are those > Pete> required to provide a RF signal sweeper, or synthesizer, relay > Pete> controllers, power supplies etc. All of which are GPIB based. > Pete> Internally there will be the need to open/close relays, read > Pete> switch setting, etc. all of which can be done from single I/O > Pete> lines. > > PC Engines (Zurich, CH) makes a line of x86-based SBC called Alix. > There is one with VGA and audio. All have a CF connector. 4G of CF > is about $10 or so. As routers, these things are embarrassingly over > capable. We're seeing CPU utilization percentage in the single digits. > > http://pcengines.ch/alix.htm > > Also, Ubiquity has an SBC called RouterStation (and a "Pro" version). > The RouterStation has a bunch of GPIO pins, but not CF. > > http://ubnt.com/products/rs.php > http://ubnt.com/products/rspro.php > > I/O might be provided by way of USB or one of the other interfaces > available. Those are the ones I know of. > > > -- > Russell Senior, President > [email protected] > _______________________________________________ > PLUG mailing list > [email protected] > http://lists.pdxlinux.org/mailman/listinfo/plug > _______________________________________________ PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
