can i see the default route? because something this is the problem. when
the default route link is dead then that could be it.
questions:
-does 10.10.10.0/24 10.10.20.0/24 and 10.10.30.0/24 live in the same
ethernet?
-can i see the results of netstat -rn and ifconfig?
-do you have other machines on the three networks to test?
On Wed, 21 Feb 2001 [EMAIL PROTECTED] wrote:
> Dears,
> .
> kasi nag setup ako ng file server under linux tapos. ip nya is
> (10.10.10.254)
> may dalawa pa akong segment 10.10.20.0 at 10.10.30.0.
> nag create ako ng dalawang virtual ip sa 20 and 30 series like
>
> ifconfig eth0:1 10.10.20.254 netmask 255.255.255.0 broadcast 10.10.20.255
> ifconfig eth0:2 10.10.30.254 netmask 255.255.255.0 broadcast 10.10.30.255
>
> tapos
>
> ping 10.10.20.254 - no response
> ping 10.10.30.254 - no response
>
> try pulling the network connection - same result.
>
> now, tried to recover using "init1" then "ctrl d"
>
> i read during reboot "eth0 in promisciuos mode".
>
> ano kaya ang mali ko.....
>
> ------------------
> sensya na sa tanong,,,,
>
> thanks
>
> Regards,
> Benjie Buenaventura
> Trend Micro, TDSC
>
> _
> Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
> To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
>
--------------------------------------
William Emmanuel S. Yu
Ateneo Cervini-Eliazo Networks (ACENT)
email : [EMAIL PROTECTED]
web : http://cersa.admu.edu.ph/
phone : 63(2)4266001-5925/5904
Man is the best computer we can put aboard a spacecraft ... and the
only one that can be mass produced with unskilled labor.
-- Wernher von Braun
_
Philippine Linux Users Group. Web site and archives at http://plug.linux.org.ph
To leave: send "unsubscribe" in the body to [EMAIL PROTECTED]
