I really like this one: https://www.ebay.com/itm/264995330214
it's a laserjet, but shaped like an inkjet! -wes On Sat, Feb 6, 2021 at 3:49 PM Denis Heidtmann <[email protected]> wrote: > My HP 4630 all-in-one ink-jet printer appears to have died. See details > below. Looking for a replacement. > > The last time I took count, we printed less than 10 pages/ week, majority > color. We want the scanner, but do not use the fax. My conclusion is that > inkjet is the proper choice. I know that there are lots of reasons to use > laser technology, but for my low use rate I do not think a case can be > made, but feel free to argue otherwise. Suggestions desired. > Thanks, > -Denis > > The failure: It does not power on. There is a power module in the > printer. It is accessible. I took it out, plugged it in, measured the > voltage, unloaded, at the three pins. 3 is 32/12V, 2 is ground, 1 is marked > with a crescent moon. Voltage of pin 3 to 2 is 32V w/ moon open; 12V w/ > moon grounded. This is what my web searches tell me they should be. Now > it is possible that the module is bad in spite of these measurements, but I > would guess unlikely. If the module is in fact good, I suspect further > attempts at repair would be beyond me, and too costly commercially. Again, > I will listen to counter arguments. > > Finally, what to do with the carcass? Does PCC have classes in repair > techniques? And if anyone here wants slighly used ink cartridges #61 let > me know. > _______________________________________________ > PLUG: https://pdxlinux.org > PLUG mailing list > [email protected] > http://lists.pdxlinux.org/mailman/listinfo/plug > _______________________________________________ PLUG: https://pdxlinux.org PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
