On 2/17/21 4:40 PM, John Jason Jordan wrote:
Yes, device names may change on booting or when plugged in, but don't device names stay put once you are booted or a drive is plugged in?
This sounds like a cable or hardware issue to me. If a drive is mounted and something happens and the kernel isn't involved, you will get a new mount address of the same thing.
Either the drives are going to sleep, as already suggested, or there is a glitch in the communication path which is causing a sporadic disconnect/reconnect sequence.
I have seen this periodically with USB, and TB3 likely uses something similar, where udev is involved.
Sorry that I don't have a solution, but if you have another TB3 cable you could use, that may help narrow things down if the problem goes away.
dafr _______________________________________________ PLUG: https://pdxlinux.org PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
