On Thu, Feb 18, 2021 at 1:24 PM John Jason Jordan <[email protected]> wrote:
> > It's definitely not the cable. I have three TB3 cables, and they have > been swapped, yet the problem remains. > > So the next logical step is to swap the other bits of hardware. Which is really difficult when you only have 1 of each. Normally in such a case we could reach out to the community to see if anyone has similar hardware we can borrow for troubleshooting, but I think you're the only one in the Portland metro area with one of those enclosures. > The four U.2 drives are plugged into two PCI cards (two drives per > card) which are then plugged into a four-slot enclosure. The enclosure > has two TB3 ports, but no on-off switch. When a powered TB3 cable is > plugged into either port the enclosure automatically powers on, and it > powers off when the cable is unplugged. > Does the enclosure offer any options to supply power externally? Might be worth a try, just as an experiment. -wes _______________________________________________ PLUG: https://pdxlinux.org PLUG mailing list [email protected] http://lists.pdxlinux.org/mailman/listinfo/plug
