Do you think a powered hub would make a difference? Can't see the difference other than it might take just one USB data cable?
Here's the dmesg from latest attempt using 2 USB adapters : 3.272009] Indeed it is in host mode hprt0 = 00021501 [ 3.272600] Freeing unused kernel memory: 1024K [ 3.332529] Run /init as init process [ 3.332540] with arguments: [ 3.332551] /init [ 3.332562] nortc [ 3.332572] noembed [ 3.332584] noswap [ 3.332595] with environment: [ 3.332605] HOME=/ [ 3.332615] TERM=linux [ 3.332626] tz=CET-1CEST,M3.5.0,M10.5.0/3 [ 3.332637] host=pCP [ 3.332647] waitusb=2 [ 3.368867] mmc0: host does not support reading read-only switch, assuming write-e nable [ 3.372202] mmc0: new high speed SDHC card at address 1234 [ 3.373360] mmcblk0: mmc0:1234 SA16G 14.4 GiB [ 3.376151] mmcblk0: p1 p2 [ 3.395713] mmc1: new high speed SDIO card at address 0001 [ 3.499097] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.499282] Indeed it is in host mode hprt0 = 00001101 [ 3.739447] usb 1-1: New USB device found, idVendor=0424, idProduct=2514, bcdDevic e= b.b3 [ 3.739472] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.740286] hub 1-1:1.0: USB hub found [ 3.740400] hub 1-1:1.0: 4 ports detected [ 4.059230] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 4.199539] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514, bcdDev ice= b.b3 [ 4.199565] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.200664] hub 1-1.1:1.0: USB hub found [ 4.200815] hub 1-1.1:1.0: 3 ports detected [ 4.509062] usb 1-1.3: new high-speed USB device number 4 using dwc_otg [ 4.643621] usb 1-1.3: New USB device found, idVendor=1c6b, idProduct=a223, bcdDev ice= 0.00 [ 4.643638] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.643654] usb 1-1.3: Product: Mass Storage Device [ 4.643668] usb 1-1.3: Manufacturer: USB2.0 External [ 4.643682] usb 1-1.3: SerialNumber: 97 436122507494 [ 4.646758] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 4.648267] scsi host0: usb-storage 1-1.3:1.0 [ 4.739060] usb 1-1.1.2: new full-speed USB device number 5 using dwc_otg [ 4.883149] usb 1-1.1.2: New USB device found, idVendor=0a12, idProduct=0001, bcdD evice=88.91 [ 4.883167] usb 1-1.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.883182] usb 1-1.1.2: Product: CSR8510 A10 [ 5.179058] usb 1-1.1.1: new high-speed USB device number 6 using dwc_otg [ 5.309576] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800, bcdD evice= 3.00 [ 5.309594] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.574805] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): No External EEPROM. Setting MAC Speed [ 5.576626] libphy: lan78xx-mdiobus: probed [ 5.590118] lan78xx 1-1.1.1:1.0 (unnamed net_device) (uninitialized): int urb peri od 64 [ 5.695246] scsi 0:0:0:0: CD-ROM ASUS SDRW-08D2S-U BA01 PQ: 0 A NSI: 0 [ 6.034146] zram: Added device: zram0 [ 6.100482] zram0: detected capacity change from 0 to 244736000 [ 6.108307] random: mkswap: uninitialized urandom read (16 bytes read) [ 6.140324] Adding 238996k swap on /dev/zram0. Priority:-2 extents:1 across:23899 6k SSFS [ 6.323296] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 9.942928] EXT4-fs (mmcblk0p2): recovery complete [ 9.945200] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 10.060532] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 21.176381] snd_bcm2835: module is from the staging directory, the quality is unkn own, you have been warned. [ 21.203327] bcm2835_audio bcm2835_audio: card created with 8 channels [ 21.265421] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) [ 21.265517] random: dbus-uuidgen: uninitialized urandom read (8 bytes read) [ 21.348491] cfg80211: Loading compiled-in X.509 certificates for regulatory databa se [ 21.361159] sr 0:0:0:0: Power-on or device reset occurred [ 21.391752] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 21.391767] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 21.398743] Bluetooth: Core ver 2.22 [ 21.398851] NET: Registered protocol family 31 [ 21.398858] Bluetooth: HCI device and connection manager initialized [ 21.403246] Bluetooth: HCI socket layer initialized [ 21.403270] Bluetooth: L2CAP socket layer initialized [ 21.403329] Bluetooth: SCO socket layer initialized [ 21.407381] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 21.439200] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 21.440527] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 21.444784] usbcore: registered new interface driver btusb [ 21.450142] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 21.451259] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for ch ip BCM4345/6 [ 21.452667] usbcore: registered new interface driver brcmfmac [ 21.734911] random: crng init done [ 21.780803] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for ch ip BCM4345/6 [ 21.780898] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for ch ip BCM4345/6 [ 21.791621] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 23.209118] Under-voltage detected! (0x00050000) [ 24.051771] Starting piCorePlayer v8.1.0 startup. [ 24.652575] Bluetooth: HCI UART driver ver 2.3 [ 24.652589] Bluetooth: HCI UART protocol H4 registered [ 24.652662] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 24.652824] Bluetooth: HCI UART protocol Broadcom registered [ 24.765911] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 24.891717] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.891727] Bluetooth: BNEP filters: protocol multicast [ 24.891745] Bluetooth: BNEP socket layer initialized [ 24.915184] Bluetooth: RFCOMM TTY layer initialized [ 24.915212] Bluetooth: RFCOMM socket layer initialized [ 24.915247] Bluetooth: RFCOMM ver 1.11 [ 25.289141] Voltage normalised (0x00000000) [ 38.499932] Finished piCorePlayer v8.1.0 startup. [ 116.809146] Under-voltage detected! (0x00050005) [ 120.969115] Voltage normalised (0x00000000) [ 151.953777] dwc_otg 3f980000.usb: dev 1.3 ep1in scatterlist error -121/-121 [ 213.089075] usb 1-1.3: reset high-speed USB device number 4 using dwc_otg tc@pCP:~$ ------------------------------------------------------------------------------------ ------------------------------------------------------------------------ castalla's Profile: http://forums.slimdevices.com/member.php?userid=15624 View this thread: http://forums.slimdevices.com/showthread.php?t=47288 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
