fiddler;389246 Wrote: 
> If it will be a relatively trivial task - even better, because this
> would be extremely helpful.
I'm working this out right now.

I should clarify this, however.  Even in the current code, I believe
that the "On Idle" action, if it's one that switches players to SN,
switches ALL the players.

fiddler;389246 Wrote: 
> Currently my Server will refuse to go into standby as long as one of my
> two squeezeboxes is still connected to Squeezecenter, because they keep
> the LAN connection active and this results in the LAN card immediately
> waking up the server again.
> Standby will only work if one SB is already connected to SN rather
> tahan SC and the one initiating the standby is doing so with 'Standby
> to SN'
You should really check your WOL settings on your NIC.  What OS are you
using?  If linux, what does 'ethtool eth0' report?  It ought to say
something like this:

Code:
--------------------
    
  Settings for eth0:
  Supported ports: [ TP ]
  Supported link modes:   10baseT/Half 10baseT/Full
  100baseT/Half 100baseT/Full
  1000baseT/Full
  Supports auto-negotiation: Yes
  Advertised link modes:  10baseT/Half 10baseT/Full
  100baseT/Half 100baseT/Full
  1000baseT/Full
  Advertised auto-negotiation: Yes
  Speed: 1000Mb/s
  Duplex: Full
  Port: Twisted Pair
  PHYAD: 0
  Transceiver: internal
  Auto-negotiation: on
  Supports Wake-on: umbg
  Wake-on: g
  Current message level: 0x00000007 (7)
  Link detected: yes
  
--------------------

The important part there is "Wake-on: g" ..which means that the system
will wake ONLY if it hears a magic packet..not on any old lan
activity.

With Windows, make sure your NIC's 'Properties->Configure->Power
Management->Only allow management stations to bring the computer out of
standby' option is checked.  Again, that's a long-winded way of saying
that only magic packets can wake the machine.


-- 
gharris999
------------------------------------------------------------------------
gharris999's Profile: http://forums.slimdevices.com/member.php?userid=115
View this thread: http://forums.slimdevices.com/showthread.php?t=48521

_______________________________________________
plugins mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/plugins

Reply via email to