peranil;491344 Wrote: > bluegaspode: I tried your suggested native code string and it worked! I > have a Denon DRA-365 receiver that also uses the RC-174 remote. I only > want to use the applet for powering on/off the receiver - think the > pronto HEX has codes for that ...
Oh dear ... i was already afraid that if it was working I had to provide all other codes... ;) Here is how you can get from the pronto-codes to the raw hex 1) replace the first four numbers (0000 006c 0000 0020) with '0x000097B4' 2) replace every 000a with '0x80000108' 3) replace every 001e with '0x00000318' 4) replace every 0046 with '0x00000738' 5) replace every 06ad with '0x0000A920' There will be some unreplaced numbers left, thats because the recorded pronto codes have same small timing variances. Just look for the numbers that look similar ... with 000b you do the same replacement like you did with 000a. With 0047 the same as with 0046 ... 0685 the same as 06ad ... In the end you should have a '0x0000XXXX' sequence with the same length as the one I posted. You should also notice that most codes look very similar. If you look at my 'raw hex explained' section from previous posts, then only the 'command' and 'command complement' parts will change. Good luck and have fun with your new DUET-remote ! -- bluegaspode 1x SB-Controller+Receiver (Duet), 1xSB-Boom. 1xSB-Radio Server (7.4.1) running on SheevaPlug (Ubuntu) with attached Western Digital MyBook Essential. Secondary 7.4 Server on Debianized Buffalo Linkstation LS-CHL. ------------------------------------------------------------------------ bluegaspode's Profile: http://forums.slimdevices.com/member.php?userid=31651 View this thread: http://forums.slimdevices.com/showthread.php?t=66795 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
