indifference_engine;522998 Wrote: > If your using the old one, post me the csv config file and I'll convert > it into the newer xml format for you.
@fquails: As promised (albeit a little later than I originally thought) is an xml config file suitable for use with SqueezeIR v0.4+ It should be broadly equivalent to your csv config files that you created for the old version. Both the xml and the lirc file need to go into the SqueezeIR\data folder on your controllers (the config contains codes for both of your amps). Any existing files in the data folder can be removed as they are just my config as an example. NB: The '.txt' at the end of the filenames will need to be removed but I had to add it to get round the forum's attachment rules. Once you've got SqueezeIR and the config files installed, restart the controller. Then go into Settings>SqueezeIR and set the default profile to whichever room you want and ensure the 'Use Player Profiles' box is selected. You may also want to go into Settings>Home Menu to put SqueezeIR on your Home Menu. Now exit the settings screen (SqueezeIR disables itself when in settings just in case you've done something silly like disabled the GO button!). Now for the fun bit... The controller should control the amp that's attached to the player that it's controlling. If you switch players then SqueezeIR will automatically switch its profile to the codes for the amp attached to the new player. The volume buttons will control the amp instead of the SBR and will work from any screen! The SqueezeIR menu contains the other functions as before but when in the menu the home button will turn the amp on (press) or off (hold), the add button will sleep the RX-397 and the volume buttons will continue to change the amp's volume. You can get to the SqueezeIR menu from the Home menu (if you've set it up as above) or from the Extras menu or quickly from anywhere by pressing back+home together. Holding back+home together on any screen takes you to SqueezeIR settings. I think the xml file format will begin to make a little more sense to you now you've got a real-life example that works with your kit. Feel free to modify it and experiment. If you make a change to the xml then you can use the 'Reload Configuration' option in SqueezeIR settings to activate the changes without needing a restart. I have found this feature a little temperamental though so you may need a restart anyway - try it and see! The RX-V1800 was a pig to configure as it uses two protocols and two device codes and one of them protocols is propietary (hence the need for the lirc file) but the RX-397 was pretty straight-forward. Obviously, I can't test that I've got all the codes correct so you may find a command that doesn't work if I've made a typo but I am confident that the files are at least syntactically correct. If there is one that doesn't work it should be relatively trivial for you to correct it especially as you've got the correct codes in the old files. Let us know how you get on... +-------------------------------------------------------------------+ |Filename: SqueezeIR.xml.txt | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=9458| +-------------------------------------------------------------------+ -- indifference_engine ------------------------------------------------------------------------ indifference_engine's Profile: http://forums.slimdevices.com/member.php?userid=20698 View this thread: http://forums.slimdevices.com/showthread.php?t=66795 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
