Thanks for bearing with me OK I've tried the below and got the following:-
[vortexbox.localdomain ~]# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes I've then entered the following command ethtool -s eth0 wol g Followed by ethtool eth0 which brings up the following:- [vortexbox.localdomain ~]# ethtool -s eth0 wol g [vortexbox.localdomain ~]# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) drv probe link Link detected: yes I've entered # vi /etc/sysconfig/network-scripts/ifcfg-eth0 which brings up the below:- "CryptoTerm" ver. 1.6 Producer : www.cryptoterm.com License : Freeware for private, non-commercial use Configuration: CryptoTerm (1).ct Authentication: password. Last login: Thu Aug 30 00:40:47 2012 from 192.168.0.3 [vortexbox.localdomain ~]# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No # Created by VortexBox web admin on 08/24/2012 12:08:22 AM DEVICE=eth0 HWADDR="00:0C:76:86:12:99" BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=yes IPADDR=192.168.0.7 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 DNS1=208.67.222.222 DNS2=208.67.220.220 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ "/etc/sysconfig/network-scripts/ifcfg-eth0" 11L, 243C I've then added ETHTOOL_OPTS="wol g" in the next available line see below:- # Created by VortexBox web admin on 08/24/2012 12:08:22 AM DEVICE=eth0 HWADDR="00:0C:76:86:12:99" BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=yes IPADDR=192.168.0.7 NETMASK=255.255.255.0 GATEWAY=192.168.0.1 DNS1=208.67.222.222 DNS2=208.67.220.220 ETHTOOL_OPTS="wol g" But haven't got a clue how to save it? ------------------------------------------------------------------------ MrClive's Profile: http://forums.slimdevices.com/member.php?userid=48176 View this thread: http://forums.slimdevices.com/showthread.php?t=96158 _______________________________________________ plugins mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/plugins
